CLEANING AND MAINTENANCE OF OUR PRODUCTS

INFORMATIONS To ensure a longer life of our furniture, it is important to carry out regularly the right cleaning operations, using appropriate products for the different surfaces. - Read carefully the various sections before cleaning the furniture and follow the recommendations - These instructions refer to the use of different care and cleaning products. Read the information provided by the manufacturer carefully and follow the instructions. - The cleaning cloth must be used with horizontal or vertical movements. Circular movements are not recommended, the risk is to cause signs on the surfaces...

SMELL We suggest to place the new furniture in a ventilated room, in order to eliminate any smell, due to adhesives or other substances used for production and packaging. CLIMATE CONDITIONS We suggest to maintain a constant temperature between 18°C and 23°C and a humidity rate of 45-60%. The heating air, during the winter time, reduces the humidity and it can cause furnishings chromatic changes. LIGHT RESISTANCE Light resistance is a term that describes the tolerance of a material to natural and artificial light sources (sunlight, lamps,...). It is not possible to foresee and prevent aesthetic...

GENERAL INFORMATION The solid wood is an high quality natural material. To preserve its own aesthetical characteristics, the furnishings are chemically treated to make the surfaces more resistant. However the colour of the surface could slightly change, due to sunlight exposition. CLEANING Do not use alkaline or acid products. Do not use mncrofibra cloths. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces wet or hot objects Clean regularly with a soft cloth, possibly without hair and slightly moist. If...

VENEER GENERAL INFORMATION The furnishings in veneer are manufactured with high quality materials. To preserve its own aesthetical characteristics, the furnishings are chemically treated to make the surfaces more resistant. They are covered with a waterproof varnish. However the colour of the surface could slightly change, due to sunlight exposition. Do not use alkaline or acid products. Do not use microfibra cloths. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces wet or hot objects It is possible to...

GENERAL INFORMATION A good quality lacquering highlights the colour and the texture, enhancing the design. The refraction of the light through a lacquered surface, creates particularly attractive and refined effects. CLEANING Do not use alkaline or acid products. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces wet or hot objects Use a soft and moist cloth, sponges or chamois leather, rub lightly so as to avoid possible abrasions due to dirt residues. If necessary, use a moist cloth with neutral soap,...

GENERAL INFORMATION One of the most important advantages of using laminates is the ease of cleaning. This is an anti-scratch material but you need to pay attention by cleaning the furniture with the right method to make sure they remain intact. CLEANING Do not use alkaline or acid products. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces hot objects It is possible to clean the furniture, using a mix of warm water and neutral soap. Rinse with cold water and dry with a piece of paper or a soft cloth....

FENIX ® GENERAL INFORMATION Fenix® is a modern material, created by using nanotechnologies. The surface is treated with new generation acrylic resins, hardened and fixed through Electron Beam Curing process. Thanks to its low light reflection, the surface is extremely matt, anti-fingerprints and with a pleasant touch sensation. In addition to its main features, such as micro-scratches reparability, this innovative material is distinguished by specific properties that make the cleaning very easy and doesn’t need specific maintenance actions. Extremely easy cleaning, high bactericidal abatement...

GENERAL INFORMATION The glass is an industrial material derived from natural elements. For some technical reasons, it is not possible to produce a completely clear and regular glazed pannel, without bubbles. The colour can slightly changes from panel to panel. The specific glass load capacity is limited compared to that of other materials: therefore avoid to load too much weight on it. Available type of glasses: - Etched glass - Back lacquered etched glass - Clear float glass -Extra light - tempered glass CLEANING Do not use cleaning products or steel wool. Do not use sharp object, such as knives,...

GENERAL INFORMATION Here below the available luxury metal types: - Chromed metal - Matt metal - Galvanized metal - Powder coated metal CLEANING Do not use alkaline or acid products. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces wet or hot objects Use a soft cloth and a neutral cleaning product Dry uniformly the surface using a soft cloth. If it is necessary to use a more aggressive product, please check if it is solvent free and test it in a small hidden area. MAINTENANCE Clean with a soft cloth,...

GENERAL INFORMATION Anodized aluminium The aluminium parts are treated to increase the thickness of the natural oxide layer on the surface. This process protects the surface from dirt and wear. Acids alkaline products, lemon juice and similar substances can damage the surfaces. Die cast aluminium This type of aluminium is available in two finishes : natural aluminium or brushed aluminium. CLEANING Do not use alkaline or acid products. Do not use cleaning products or steel wool. Do not use sharp object, such as knives, that can scratch the surfaces. Do not put on the surfaces wet or hot objects...