Technical Specification ZERO-IN Barber & Osgerby Type Coffee Table Design 2005 Designer Barber & Osgerby The Zero-In table creates an illusion of weightlessness, with seamless sloping walls at unexpected angles topped with a glass surface, all supported by hidden feet that create a shadow gap below the structure. Materials Satin-finish polyester moulded ompound, 4mm toughened glass, nylon (feet) Packaging Dimensions L935mm × D935mm × H410mm Packaging Weight 20kg Packaging Type Cardboard Note Part assembled, 2 people required for handling and assembling Care & Maintenance Avoid contact with certain solvents, including white spirit, toluene based products and acetone. Beware of many household cleaning products and polishes as these may contain potentially damaging solvents. Notes Product tested for General contract use by FIRA International Ltd Strength, durability and safety: BS EN 15372:2016 Test level 2 Report Test number: TSTAF 75400 Table Colour Glass Colour Black tinted glass Transparent glass Base Clean the base using a soft nonabrasive cloth. An ideal cleaning product to use is deionised water (Tap water contains salts that can leave a residue on the surface of the polyester) with a mild, non- coloured detergent, such as, Ecover Washing Up liquid. To avoid temporary streaking and residue, dry using a soft cloth. It is advisable to dust the base with a lint free cloth before applying any cleaning fluid. This will remove any grit that could cause scratches to the surface. Glass It is advisable to dust the glass before applying any cleaning fluid. This will remove any grit that could cause scratches to the surface. We recommend using a mild glass cleaner, such as Ecover and paper/kitchen towel. Always apply the cleaning fluid to the paper towel first and not directly onto the glass. Do not use washing powders or any other substances containing abrasives as these will scratch the glass.