Product Identification and Manufacturer Information
The document pertains to a ceramic sanitary ware product identified by the code WCBLL + CMBL from the BULL collection. The manufacturer is SDR Ceramiche srl, located in Fabrica Di Roma (VT), Italy. Contact details include phone +39 0761 541055 and email [email protected].

Product Specifications
- Weight: 28 kg + 10 kg
- Flush volume: 6 liters
- Various dimensional parameters are provided, including diameters (ø55 mm, ø100 mm), lengths, and other measurements (e.g., 670, 140, 36, 5, 530, 160, 380, 18, 30, 35, 91, 60) likely in millimeters.
- Water inlet connection is specified as "Art. C1" with adjustable cutting range from 130 to 230 mm.
- Additional parts or accessories referenced as Art. C2, Art. C3, and Art. E2 with cutting ranges from 140 to 320 mm depending on the part.

Technical Notes and Tolerances
- Dimensional variations of approximately ±0.8% are possible due to mold wear or slight variations in raw material properties.
- The eccentric fitting must be installed flush with the floor level, emphasizing proper installation alignment.

Installation and Cutting Instructions
- Several parts require cutting to specific millimeter ranges to fit installation needs.
- The eccentric component must be embedded flush with the floor surface to ensure correct assembly and function.

Summary of Critical Parameters
- Weight: 38 kg total (28 + 10)
- Flush volume: 6 liters
- Dimensional tolerance: ±0.8%
- Water inlet fitting: adjustable cut from 130 to 230 mm
- Installation requirement: eccentric fitting flush with floor level

This document serves as a technical specification and installation guideline for the ceramic sanitary product, providing essential measurements, tolerances, and installation notes to ensure proper use and fitting.