Product Identification

Collection: QUADRA
Article Code: BDSQD
Weight: 24 KG
Model: CL20

Manufacturer Information

SDR Ceramiche Srl
Location: Quartaccio, snc 01034 Fabrica Di Roma (VT)
Phone: +39 0761 541055
Email: [email protected]
Website: www.sdrceramiche.it

Technical Specifications and Installation Notes

• The dimensions provided for the space allocation of hydraulic systems are indicative.
• Ceramic tolerances must be considered; it is recommended not to work at the exact limit of the indicated usable spaces.
• The dimensions refer to the bidet installed at a height of 420 mm from the floor to the upper edge.
• Measurements may vary by approximately 0.8% due to mold wear or slight variations in the technical characteristics of the raw materials used in the ceramic mixture.

Dimensional Data

The document includes various dimensional values (in millimeters) related to installation and product size, such as:

• Height, width, and depth measurements (e.g., 550 mm, 240 mm, 180 mm)
• Diameter specifications for holes or fittings (e.g., Ø45 mm, Ø35 mm)
• Maximum and minimum spacing values (e.g., MAX 150 mm, MIN 110 mm)

These dimensions are critical for proper installation and fitting of the bidet and associated hydraulic components.

Critical Recommendations

• Allow for ceramic manufacturing tolerances when planning installation.
• Do not rely on exact nominal dimensions; always consider potential variations.
• Ensure installation height is maintained at 420 mm from floor to top edge for correct fitting.