Catalogs >
Escea >
EW5000

EW5000
2Pages

Catalog excerpts

Cavity Information EW5000 Information Sheet for Builders and Architects A minimum cavity size of W1000 x D490 x H760 mm (W 39 3/8” x D 19 9/32” x H 29 5/16”) is needed. This is a minimum and where possible, it is recommended that the cavity is made slightly larger than the above dimensions to give the installer the maximum amount of space to work in. For installations with a fascia; The opening of the cavity must be at minimum W1000 x H570mm (W39 3/8” x H22 7/16”) and at maximum W1230 x H610mm (W48 7/16” x H24”) in order for the fascia to cover the opening. For further information or specifications, visit the technical section of our website www.escea.com to view the latest product Installation Manual. For installations without a fascia; The opening of the cavity must be W900 x H510mm (W35 7/16” x H20 1/16”). Note: The firebox does not slide in through this opening and has to be installed before the bricklaying or wall lining (hatched area shown below) is finished. Appliance Information Cavity Dimensions With Fascia Without Fascia Corner Installation Note all dimensions are a minimum. All walls surrounding the firebox must be non-combustible.

Open the catalog to page 1

Flue System The flue system requires the use of 350mm (13.7795”) GALV outer casing and stainless steel cowl. It is recommended to use a minimum of 2.4 meters (11 3/4 ft) of flue to create adequate draw and reduce the amount of smoke spillage out the front of the fireplace. Shorter flue lengths are possible but may result in smoke spillage and possible smoke damage to the fascia and/ or wall. Flue clearances must adhere to local codes. Flue parts can be provided by ESCEA at your local ESCEA retailer/ supplier. Any combustibles in front of the fireplace need to be no less than 3 meters (7.87...

Open the catalog to page 2