Information Sheet for Builders and Architects For further information or specifications, visit the technical section of our website www.escea.com to view the latest product Installation Manual. Appliance Information Gas Specifications Heat Output 8kW* Gas Input / Consumption 33MJ/hr* Gas Connection Lower right side of appliance, 1/2” BSP Gas Type Natural Gas / LPG (NZ) / Propane (Aus) Operating Pressure 0.76kPa NG / 1.96kPa LPG or Propane Inlet Gas Pressure 1.13kPa to 5.0kPa NG 2.75kPa to 5.0kPa LPG or Propane Power Requirement 3 pin earthed 230V power outlet to be within 1.0m of right side of the appliance 70 * Internal results pending confirmation from test laboratory Cavity Information Minimum Cavity Dimensions (mm): The appliance must be installed prior to and behind the finished wall surface. Take into account any plaster board, tiles or any other finishing surface that may be intended for the finished wall surface. Wall finishing materials must not encroach upon the minimum cavity clearances shown. Single Sided The wall board that lines the outside of the opening can be normal plaster board and does not need to be noncombustible. Double Sided ‘Hutch’ style cavity minimum dimensions (mm) Wall opening size for frameless / no fascia (mm) 63023

Flue and Duct Information Ducting information: This gas fire features a small network of ducting situated either in the ceiling or under the floor to distribute the heat generated by this fireplace. Warm room air ducted to outlets #906660 Escea DX Ducting Ceiling Outlet Kit + #906640 Escea DX Ducting Fan Unit 3m Ø150 #906650 Escea DX Ducting Flooring Outlet Kit + #906640 Escea DX Ducting Fan Unit #906661 Escea DX Ducting Extension Kit Flue information: There are two basic types of flue configuration, using a vertical powerflue cowl, or a horizontal powerflue cowl. The horizontal offset of the...