Renz – the top address for your mail Mail box units

Quality is more than a promise Mail Box Units can be affected by over ambitious postmen, vandals and bad weather to name but a few. To combat this Renz products are produced with practical designs, selective materials and are finished to a high standard to ensure many years of reliable service. Perforated intercom panel RSA protected against vandalism. Bell/light button RSA protection against vandalism. Name plate RSA back lit. The centring pin positions the door to ensure a perfect fit. Gutter is fitted to ensure the mail stays dry inside the box. RS50 plate is fitted on larger mail boxes to...

Special units Special units from various Model Groups Model Group 14 Slide-through units for wall installation Model Group 15 Commercial line Residential line Model Group 17 Top opening mail boxes canto, cubico, radio Top opening mail boxes Single letter Plates Bell elements for wood/door side sections Model Group 21/22 Mail sorters Renz mail box units are built to the highest quality. Choose between vertical and horizontal versions. Model Group 13 Units with horizontal mail boxes Overview Free-standing mail box units Face-fixed mail box units Flush-fixed mail box units Model Group 16 Intercom...

Special units Made to measure from various model groups. With the various ranges of RENZ mail boxes it is possible to manufacture units Source: Ernst-Neufert-Bau, Darmstadt Architects P. Karle + R. Buxbaum / Photo: Thomas Eicken to your individual requirements.

Fig. 5/1 Mail box of Model Group 10, with RSAand RS50. CONVEX roof, Fig. 5/2 Special mail box unit, mail removable from the front or back, side sheet casing manufactured from V4A stainless steel, 60 mm bevelled with RSA, unit can be fitted into the side panel of the door section or steel tubular stand. Door opening to the left, 2-point locking. can be for standing on a pedestal, engraved front with back lighting, completely made of V4A stainless steel. Fig. 5/3 Mail box unit from Model Group 13, with RSA, sheet aluminium Fig. 5/4 Mail box unit from Model Group 12, box with angled chute casing...

Photo: RENZ

Fig. 7/1 Mail box unit from Model Group 13, with RSA , incorporating CCTV camera supplied by others, 2 mm square corner casing, free-standing on pedestal, completely manufactured from V4A stainless steel Fig. 7/2 Mail box unit from Model Group 13, with RSA, 10 mm sheet casing and frame, completely manufactured from V4A stainless steel. Fig. 7/3 Mail box unit from Model Group 13, sheet casing and doors, 60 mm round tubular stand, with RSA, trapezoidal roof, completely manufactured from V4A stainless steel. (Roof can also be supplied of galvanised sheet steel, powder-coated). Fig. 7/4 Mail box...

Model Group 10 Vertical mail boxes. You have the choice from the small box for residential applications up to the extra deep business mail box which can be fitted with various finishing profiles. Mail boxes Plaster frame for flush-fixed units Corner profile plaster frame Box: 370 x 330 x 145 mm optional extra RS50 EN 13724 Letter plate 335 x 50 mm Box: 300 x 440 x 145 mm optional extra RS50 EN 13724 Letter plate 265 x 50 mm Box: 370 x 440 x 145 mm optional extra RS50 EN 13724 Letter plate 335 x 50 mm PRISMA® plaster frame Information The volume of mail is likely to increase considerably over...

The stainless steel models Extra features / accessories Standard version: Standard version: The following extra features can be obtained for an additional charge: (not for 220 x 290 x 70 mm boxes) • Material: galvanised sheet steel (Galfan) • 10-year guarantee against rusting • High-grade cylinder locks • Deep drawn doors (not with the 220 mm wide box and the business series). • Powder coating • Aluminium profile letter plate with sound reducing rubber section. • RS50 is standard with 145 mm box depth The aluminium models Instead of the sheet steel door, this item is fitted with an anodized aluminium...

Model Group 10 Units with vertical mail boxes Numerous benefits come with using RENZ vertical mail box units. A full range Photo: RENZ of colours and designs are available.

Fig. 11/1 Box format 260 x 330 x 100 and 370 x 330 x 145 mm with RS50 Fig. 11/2 Box format 370 x 330 x 145 mm, and RSA, bell and intercom box of special design, inscription box, 40 x 48 with RS50 and RSA, PRISMA plaster frame. mm aluminium profile plaster frame. Letter Plates 230 x 33 mm or 335 x Letter plates 335 x 50 mm. Fig. 11/3 Box format 370 x 330 x 145 mm, with RS50and RSA, RS3000 Fig. 11/4 Box format 370 x 330 x 145 mm, with RS50 and RSA inscription aluminium radius-profile plaster frame. Letter plates 335 x 50 mm. box, V4A stainless steel angular plaster frame. Letter plates 335 x 50...

Model Group 10 Units with vertical mail boxes. Face-fixed. Fig. 12/1 Box format 260 x 330 x 100 mm, QUADRA aluminium casing profile fitted on all 4 sides. Letter plates 230 x 33 mm. Fig. 12/2 Box format 370 x 330 x 145 mm, with RS50 and RS2000 aluminium casing profile. Letter plates 335 x 33 mm. Fig. 12/3 Box format 370 x 330 x 145 mm, with RS50 and PRISMA casing. Letter plates 335 x 50 mm Fig. 12/4 Box format 370 x 330 x 100 mm, with RSA, and V4A stainless steel sheet casing. Letter plates 335 x 33 mm.

Model Group 10 Units with vertical mail boxes. Free-standing. Fig. 13/1 Box format 370 x 330 x 145 mm, with RS50, RS2000 aluminium casing profile and 105 x 45 mm oval tubular stand. Letter plates 335 x 50 mm Fig. 13/2 Box format 370 x 330 x 145 mm, with RS50, inscription box, PRISMA casing and frame. Letter plates 335 x 50 mm. Fig. 13/3 Box format 370 x 330 x 145 mm, with RS50 and RSA, 2nd name plate, inscription box, V4A stainless steel PRISMA casing and frame. Letter plates 335 x 50 mm. Fig. 13/4 Box format 370 x 330 x 100 mm, QUADRA aluminium casing profile fitted on all 4 sides and 80 x 40...

Horizontal mail boxes. Select and combine any of the nine different basic formats and extra large boxes of the business series with angular or radius casing profiles. Box: 260 x 110 x 385 mm Box: 260 x 220 x 385 mm Box: 260 x 330 x 385 mm Corner profile plaster frame RS3000 radius-profile plaster RS3100 radius-profile plaster Letter plate 230 x 33 mm Letter plate 230 x 33 mm Letter plate 230 x 33 mm Box: 300x 110 x 385 mm Box: 300 x 220 x 385 mm Box: 300 x 330 x 385 mm PRISMA* plaster masking RS2000, RS4000, RS4100, EN 13724 EN 13724 EN 13724 frame PRISMA*, QUADRA* as wall Letter plate 265 x...