Filius Control W

Product catalog summary

Overview: The EOS Filius Control W is a compact, wall-mounted sauna heater designed for domestic sauna cabins, specifically for Finnish (dry) saunas. It features a contemporary design and is manufactured in Germany.

Key Advantages:

Compact design with a depth of only 24 cm.
8 kg rock store for stable temperature and effective water infusions.
Optional control unit position change from right to left.
No external sensor cable required as the sensor is integrated into the heater.
Easy replacement of heating elements.
Scratch-resistant anthracite pearl effect powder-coating.

Specifications:

Outer Shell: Steel with anthracite pearl effect coating.
Inner Shell: Galvanized, corrosion-resistant steel.
Top: Brushed stainless steel.
Rear Wall: Zinc-plated steel.
Stone Support Grill: Stainless steel.
Electrical Connection: 400 V 3N ~ 50 Hz.
Power Output: Available in 4.5, 6.0, and 7.5 kW.
Temperature Range: 40 - 100 °C with a limiter at 142 °C.
Heating Time Limit: 4 hours.

Installation:

Wall-mounted directly to the sauna wall.
Minimum clearances specified for safe installation.
Control panel located on top of the heater for easy operation.

Technical Details:

Dimensions: Height/Width/Depth - 57/47/24 cm.
Suitable for sauna cabin sizes ranging from 4 to 10 m³ depending on the power output.
Minimum air inlet and outlet size: 35 x 11 cm.
Weight without rocks: 15 kg.
Stone Filling: Approximately 8 kg.

Additional Information:

Spare heating elements available for different power outputs.
Connection cables must have a minimum diameter specified in mm² (copper wire).

Catalog excerpts

Technical data sheet Sauna heater for domestic sauna cabins. Wall-mounting model. Compact sauna heater for the Finnisch (dry) sauna. With only 24 cm depth the Filius Control W heater is a very space-saving model and still offers a fairly large 8 kg rock store. Straightlined contemporary design is a perfect match for modern sauna cabins. Your advantages: • • • • • • • Compact, extra slim design - only 24 cm depth. 8 kg rock store for temperature stability and good water infusions. Optional change of position of control unit from right to left No need for mounting any sensor cable (sensor is placed inside the heater) Easy replacement / change of heating elements Contemporary, straightlined design. Scratch resistant anthracite pearl effect powder-coating. Made in Germany quality from EOS. Specifications: Outer shell: Steel with anthracite pearl effect powder-coating (scratch-resistant) Inner shell: Galvanized steel, corrosion resistant Top: Rear wall: Stone support grill: Brushed stainless steel Zinc-plated steel Stainless steel Hidden in the main housing, connections from the bottom 4.5, 6.0 und 7.5 kW Leistungen: Anschluss: Rock store volume: Installation: Temperature sensor Temperature limiter 400 V 3N ~ 50 Hz approx. 8 kg (Stones optionally available) Wall-mounted heater, direct mounting to the sauna wall 40 - 100 °C 142 °C, Heating time limit 4h Control panel on the top of the heater: - clearly visible - safe and simple to operate EOS Saunatechnik GmbH | Schneiderstriesch 1 | 35759 Driedorf | Germany | Tel. +49 (0) 2775 82 - 0 | www.eos-sauna.com | in

Open the catalog to page 1

Minimum clearances Connection diagram sauna cabin wall heater guard rail Spare heating elements Installation example Wall-mounting installation Sensor installation Technical specifications Item no. All cross sections of a connection cables are minimum diameters in mm2 (copper wire), make sure to observe 16 cm ground clearance. Technical changes reserved EOS Saunatechnik GmbH | Schneiderstriesch 1 | 35759 Driedorf | Germany | Tel. +49 (0) 2775 82 - 0 | www.eos-sauna.com | [email protected]

Open the catalog to page 2

Filius Control W

Filius Control W

Catalog excerpts

All Eos catalogs and technical brochures