ANOUK
ANOUK
The Anouk seating collection includes headrests, backrests, armrests, and various leg options. The headrest features foam with a density of 42 kg/m³, while the backrest uses foam with a density of 35 kg/m³. The seat is constructed from a melamine-covered particle board with two foam blocks for comfort, with densities of 30 kg/m³ and 35 kg/m³. The metal structure is a rounded tubular design with an epoxy lacquer finish.
Base Options:
The fixed-leg version includes four legs with black plastic glides, while the mobile version has two fixed legs and two front castors suitable for all floor types.
Materials and Certifications:
The foam is OEKO-TEX STANDARD 100 certified and carries the CertiPUR label. The recycled cotton core is eco-friendly, made from 85% recycled textile fibers, and is 100% recyclable with a fire rating of D-s2.d0.
Fabric Options:
Various fabric options are available, including Chili, Step/Step Mélange, Secret, and Fenice, each with specific compositions, weights, abrasion resistance, light fastness, and environmental certifications.
Standards and Guarantees:
All foam materials are OEKO-TEX certified, ensuring they are free from harmful substances. The products are guaranteed for five years.
Contact Information:
The document provides contact details for locations in Paris, Nieuwegein, and Brussels.
Catalog excerpts
EUROPEAN OFFICE FURNITURE MANUFACTURER
Open the catalog to page 1
Headrest Foam density: 42 kg/m³ Comfy backrest Foam density: 35 kg/m³ Optional armrests Recycled cotton core with fabric covering Soft seat 2 foam blocks: - Bottom: density 35 kg/m³ - Top: density 30 kg/m³ Fixed legs with black glides Mobile legs with castors, ø 80 mm
Open the catalog to page 2
Technical data sheetLounge and Restaurant seating Seat > Melamine-covered particle board panel (thk 19 mm) combined with two blocks of open-cell foam for optimum support and comfort (density: top block 30 kg/m3, bottom block 35 kg/m3) > Fabric covering Backrest > Open-cell foam block, density 35 kg/mF > Fabric covering Foam > The foam used in the seats and backrests is certified to OEKO-TEX STANDARD 100 and carries the CertiPUR label Seat/backrest assembly > The seat and backrest are held together by a tubular structure (which includes the armrests and legs) Finish > Piping trim around the seat...
Open the catalog to page 3
Anouk Partitions > MDF structure (thk 5 mm) covered on both sides with foam (thk 10 mm) > Headrest at the top, made from open-cell foam (density 42 kg/m3) > Piping trim with straight corners > Topstitching in matching shade > Choice of fabric (see shade card) > Structure consisting of 3 or 4 sections depending on the number of seats: - 3 sections for 1-person chairs - 4 sections for 2-person sofas Attachment of the partitions to the structure > To fit the partitions, move aside the fastener below the seat, then slide the partitions between the tubular structure and the seat/backrest unit (see...
Open the catalog to page 4
Technical data sheet Fabric
Open the catalog to page 5
Technical data sheet Standards OEKO-TEX® CONFIDENCE IN TEXTILES oQn STANDARD 100 All the foam used in our seats are OEKO-TEX certified To be OEKO-TEX certified, materials must not contain any substances that are harmful to human health or the environment. This includes formaldehyde, heavy metals, pesticides, chlorinated phenols, phthalates and polycyclic aromatic hydrocarbons.
Open the catalog to page 6
EUROPEAN OFFICE FURNITURE MANUFACTURER
Open the catalog to page 7All Eol catalogs and technical brochures
Collection 2023 / 2024292 Pages
Erin10 Pages
Lutz 27 Pages
eol. 2019/2020292 Pages
Eol 2017188 Pages
- Lounge chair
- Contemporary lounge chair
- Textile armchair
- Armchair with armrests
- Dining table
- Monochrome lounge chair
- Contemporary dining table
- Indoor dining table
- Desk
- Commercial armchair
- 4-legged armchair
- Modern desk
- Rectangular dining table
- Gray armchair
- Wooden office desk
- Commercial desk
- Metal base armchair
- Beige armchair
- Free-standing desk
- Metal base dining table