Emfa catalogue
438Pages

LEKTON LED DOWNLIGHT FIXTURESIP20 Reflector : 15°, 30°, 45° Aluminium-Coated Polycarbonate Reflector Diffuser : Clear Glass Gear : 240V Non-Dimmable Driver (1-10V Dimmable Driver & DALI Driver available on request) Springs : Plastic covered Stainless Steel for mounting in ceilings of 1-25 mm Cable : 0,5 m 2x0,75 mm H03 VV-F IP65 POWER LED Voltage : 240V AC with integrated driver (24V AC or DC on request) Lens : 10°, 15°, 30°, 45°, 60° Diffuser : Clear Glass 4 mm Cable : Potted 5 m 3x0,75 H03 VV-F

Drive Over

EMFA’s Knidos series consists of a range of LED, metal halide, and fluorescent sources to deliver the desired light effect to facades, columns, monuments and trees. The fixture is made of a combination of 316L stainless steel and glass reinforced polyester, which makes it completely resistant to corrosion. The sturdy fixture allows loads up to 20kN and IK 10. The LEDs used come in 3 different tones of white, as well as blue, red, green, and amber. An anti-slip glass is available upon request. Adjustable Asymmetrical LEDs In this series EMFA is introducing its first adjustable asymmetric LED...

Voltage : 240V A.C with integrated driver (24V AC or DC on request) Lens : 10°, 25°, 40° Diffuser : 12 mm Clear Glass (Frosted Glass on request) LED power 9 x 350 mA (9 W) — Warm White Natural White • Cool White — Blue * Red • Amber * Green Total Lighting Output 3300 K 630 lm Flush Step Mounted Mounted Code No Code No 258001 258011 Diffuser : Clear Glass Gear : Electronic METAL HALIDE CDMR-111 35W 10° or 40° Code No Flush Mounted 254301 Diffuser : Clear Glass Gear : Electronic METAL HALIDE CDMR-111 70W 10° or 40° Code No Flush Mounted 254401

RECESSED DRIVE OVER FIXTURES Load 20 kN | Class I IP67 IK10 WALL WASHER Lampholder Reflector Diffuser Temp : Rx 7s : Asymmetric 50º : Clear Glass : 105ºC Lampholder Reflector Diffuser Temp Flush Mounted Step Mounted METAL HALIDE 150W Code No 251101 251201 Flush Mounted Step Mounted : Rx 7s-24 : Asymmetric 50º : Clear Glass : 176ºC Flush Mounted Step Mounted ADJUSTABLE SPOTLIGHTER Lampholder Reflector Diffuser Temp : G12 Adjustable ± 35º : 30º : Clear Glass : 102ºC METAL HALIDE 70W Flush Mounted Step Mounted 35º 0º 1000 : G12 Adjustable ± 35º : 30º : Clear Glass : 173ºC METAL HALIDE 150W...

RECESSED DRIVE OVER FIXTURES Load 20 kN | Class I IP67 IK10 SYMMETRICAL UPLIGHTER WITH LOUVRE Lampholder Reflector Diffuser Temp : G x 24 q4 : Symmetric 50º : Clear Glass : 98ºC COMPACT FLUO. 2 x 42W Flush Mounted Step Mounted Flush Mounted Step Mounted SYMMETRICAL WIDE BEAM UPLIGHTER Lampholder Reflector Diffuser Temp : G x 24 q4 : Symmetric 90º : Clear Glass : 98ºC COMPACT FLUO. 2 x 42W Flush Mounted Step Mounted Flush Moun

RECESSED DRIVE OVER COOL GLASS FIXTURES Load 20 kN | Class I IP67 IK10 ADJUSTABLE SPOTLIGHTER Lampholder Reflector Diffuser Temp METAL HALIDE 35W Step Mounted METAL HALIDE 70W Step Mounted Cover 316L Stainless steel Body 316L Stainless steel Diffusers 12 mm Tempered Glass Gaskets Silicone Screws 316L Stainless Steel The Knidos Cool Glass Uplighter, completely made of 316L stainless steel has a maximum surface temperature or 55 degree when using a 70W metal halide lamp and is ideal for areas where corrosive agents such as salt water or fertilizers would harm aluminium fixtures. A fan is...

RECESSED DRIVE OVER FIXTURES Load 10 kN | Class I IP67 IK10 EMFA’s Santos flush mounted series is specially designed to deliver low-glare lighting to facades, columns, monuments and trees with minimal installation depth and narrow trim. The fixture is made of a combination of 316L stainless steel and die cast aluminium. A shield above the lamp reduces the glare of the metal halide lamps. A mirror finish reflector allows for a narrow to wide beam light output. An anti-slip glass is available upon request. Cover 316L Stainless steel Body Die cast aluminium or aluminium profile with die cast...

it Led Reflector Diffuser Gear Temp Vertical Tilt COB LED - Adjustable 10°, 23°, 38° Aluminium-Coated Polycarbonate Reflector Clear Glass 240V Non-Dimmable Driver (1-10V Dimmable Driver & DALI Driver available on request) 42°C

RECESSED DRIVE OVER FIXTURES Load 10 kN | Class I IP67 IK10 METAL HALIDE Lampholder : G 8.5 fixed Reflector Diffuser METAL HALIDE 20W METAL HALIDE 35W METAL HALIDE Lampholder Reflector Diffuser Temp METAL HALIDE CDMR 111 35W METAL HALIDE CDMR 111 70W

RECESSED DRIVE OVER FIXTURES Load 6 kN | Class I IP67 IK10 EMFA’s Santos step mounted series is specially designed to deliver low-glare lighting to facades, columns, monuments and trees with minimal installation depth and narrow trim. The fixture is made of a combination of 316L stainless steel and die cast aluminium. A shield above the lamp reduces the glare of the metal halide lamps. A mirror finish reflector allows for a narrow to wide beam light output. An anti-slip glass is available upon request. Cover 316L Stainless steel Body Die cast aluminium or aluminium profile with die cast...

Led Reflector Diffuser Gear Temp Vertical Tilt COB LED - Adjustable 10°, 23°, 38° Aluminium-Coated Polycarbonate Reflector Clear Glass 240V Non-Dimmable Driver (1-10V Dimmable Driver & DALI Driver available on request) 42°C 30° Total Lighting Output 1224 lm 1469 lm Diffuser : Clear Glass Diffuser : Clear Glass

Lampholder : G 8.5 fixed Reflector : 12°, 36° Diffuser : Clear Glass Temp : 62°C, 100°C Lampholder : G 8.5 fixed Reflector : 12°, 36° Diffuser : Clear Glass Code No METAL HALIDE CDMR 111 35W 551151 METAL HALIDE CDMR 111 70W 551161

Led Reflector Diffuser Gear Temp Vertical Tilt COB LED - Adjustable 10°, 23°, 38° Aluminium-Coated Polycarbonate Reflector Clear Glass 240V Non-Dimmable Driver (1-10V Dimmable Driver & DALI Driver available on request) 42°C 30° Total Lighting Output Code No 768 lm 551311 864 lm 551312 Diffuser : Clear Glass Diffuser : Clear Glass