emco dirt collection wells For increased dirt levels in heavily frequented entrance areas Designing clean entrances

emco dirt collection wells Increased dirt uptake with heavy loading Even extremely high dirt levels in heavily frequented entrance areas can be handled with ease using emco dirt collection wells. When combined with the heavy-duty MARSCHALL and PLAZA entrance mats, they form a single unrivalled unit in terms of cleaning efficiency, water drainage and practicality. They also extend the deep-cleaning intervals. Multi-piece well connectors with integral drainage system Variable well heights Increased dirt uptake

Did you know ... ... you can choose the height of the well? ... a heavy-duty version of the dirt collection well is also available? ... the well can be easily installed as there are no screw fixings on the underside? ... multiple wells can be connected to each other with a single drain? ... you can specify the length of the waste pipe for connection to the greywater system? ... there are three drain sizes? Extended deep-cleaning intervals Also suitable for heavy loading Design freedom Integral drainage available in 3 sizes Variable length waste pipe

emco dirt collection wells Maximum design freedom for every situation With emco dirt collection wells, customised curved or chamfered shapes, can be easily achieved. Architecturally inviting entrances, in particular, demand a harmoniously integrated entrance mat. The wells are placed in the area with the highest dirt frequency. The entrance mat is specifically adapted to the shape of the dirt collection well (type 5022) or extends as far as your want beyond it (type 5000) for greater creative freedom. Several variants are available including an extremely heavy-duty option.

emco dirt collection wells From a visual and functional perspective, the entrance mat is manufactured either in the same size without a frame, or – more commonly – with a frame. The aluminium material is welded watertight and has a completely smooth interior for easy cleaning. Dirt collection wells are also available on request in stainless steel. The support profiles are made from the same material as the frame. They are spaced at distances from 150 mm to a maximum of 300 mm, with recesses for all-round water drainage. The support profiles are always installed perpendicular to the entrance mat...

emco dirt collection wells can accommodate any requirement and are available in either: Aluminium or stainless steel and any construction height. With or without edging frame for the entrance mat. With or without grid for extra stability in the event of heavy overrolling. No matter which you choose, every variant captures large volumes of dirt and contaminated water. Available on request with drainage system (except types 5512 to 5542). Despite the well's rectangular shape, you can be as creative as you like with the mats. Architecturally inviting entrances, in particular, demand a harmoniously...

Type 55xx wells sit flush with the entrance mat across their width, depth and height. The well thus functions as a mat well with a frame recessed into the ground. These wells make installation in a floor screed significantly easier. The wells are also easy to clean and thus protect downstream floorings as well as the substructure. Designed for extreme loading. Overrolling with, for example, carts, shopping trolleys or electric pallet trucks is not a problem. Thanks to the short distances between the support profiles and an integral grid, these dirt collection wells are the best solution for heavy...

emco substructure Extremely effective with long cleaning intervals emco substructures are a particularly effective alternative to emco dirt collection wells. They can handle exceptionally high dirt levels with extremely long cleaning intervals. Versions B and C are available in fixed installation heights, while version A offers flexible heights up to a maximum of 280 mm. emco substructures are designed for use in combination with the more resilient emco MARSCHALL PREMIUM and ORIGINAL and PLAZA entrance mats. Variable heights Increased dirt uptake

Extended deep-cleaning intervals Design freedom Also suitable for heavy loading

emco substructure Type A and Type B with grid and rectangular tube profiles Type C with rectangular tube profiles Set-up: customised structure on rectangular tubes with grating (type B) or without grating (type C), depending on the variant. To compensate for a particular floor depth or unevenness in the floor, adjustable galvanised steel feets are used (type A).

emco special frame with grid support and height adjustment mechanismemco special frame with grid support and rectangular tube profilesemco special frame with rectangular tube profiles Substructure Type A: A load-bearing substructure (hot-dip galvanised), consisting of gratings with rectangular tubes screwed to the frame profile, additionally designed with adjustable feet made of galvanised steel. A load-bearing substructure (hot-dip galvanised), consisting of gratings with rectangular tubes screwed to the frame profile. A load-bearing substructure (hot-dip galvanised) with rectangular tubes screwed...

Deutscher Ladenbau Verband EN-855-410067-2504 - Subject to technical modifications. F©B NetzwerkBoden emco service We know how varied project requirements can be. That's why we are happy to work with you to develop solutions A your project as well as offering many other practical services: • telephone, online and personal project guidance • personal contact at www.emco-bau.com • Texts for invitations to tender can be downloaded from www.emco-bau.com. emco Bautechnik GmbH Postfach 1860 D-49803 Lingen (Ems)