Emac Complementos, S.L. reserves the right to modify the geometry of the profile or the specifications of its products at any time. TECHNICAL DATA SHEET Novojunta® Pro Metal SIS a100 Floor/floor. Very heavy loads. Novojunta Pro® Metal SIS a100 is a profile system made entirely of aluminium for installation in large expansion joints. This system consists of pieces that slide together, allowing for the absorption of large multidirectional movements. Its design facilitates mobility while keeping the visible surface flat and without protrusions. With a ribbed visible surface, it is an ideal model for heavy traffic areas thanks to its outstanding load-bearing capacity and wear resistance. Applications Buildings and construction elements are subject to deformation and geometric variations. The installation of expansion joints helps to reduce the effects that these variations have on the building as a whole, preventing the appearance of pathologies. The CTE (Technical Building Code) in its DB-SAE (Actions in Building) establishes that in concrete or steel buildings, expansion joints shall be arranged so that there are no continuous elements longer than 40 m. Novojunta® Pro Metal SIS is a solution for structural joints consisting of a set of large, high-strength sliding aluminium pieces. Novojunta® Pro Metal SIS has a ribbed surface that gives it anti-slip properties, making it ideal for flooring. Its excellent load-bearing capacity makes it suitable for very heavy traffic, meeting the most demanding requirements. 1/

TECHNICAL DATA SHEETNovojunta® Pro Metal SIS al00 General Features_ Material: Aluminium Finishes: Natural R03.001_02/02/2026 Emac Complementos, S.L. reserves the right to modify the geometry of the profile or the specifications of its products at any time. Technical Features Typical values according to standard. They do not constitute a material certificate. Load support Novojunta® Pro Metal SIS supports very heavy loads and is suitable for pedestrian traffic, heavy vehicle traffic and industrial traffic: -Lorries and industrial vehicles: wheel loads up to 30 kN. -Forklift trucks and pallet trucks:...

TECHNICAL DATA SHEET Novojunta® Pro Metal SIS a100 Materials Novojunta® Pro Metal SIS is a profile made entirely of extruded aluminium. Aluminium is a material with excellent chemical and physical-mechanical properties. It is lightweight, strong, ductile, malleable and highly durable. It has very good resistance to corrosion and fire. Aluminium is a highly valued material used in various sectors, especially in construction. It can be transformed in many ways, allowing for the creation of very different geometries with high performance. It is a recyclable material. Emac Complementos, S.L. reserves...

TECHNICAL DATA SHEET Technical information You can find more information about the technical characteristics of Emac® products by downloading their technical data sheet at www.emac.es. Emac Complementos, S.L. reserves the right to modify the geometry of the profile or the specifications of its products at any time. For any further queries, please do not hesitate to contact our Technical Department at tecnico@ emac.es. OUTDOOR EXTÉRIEUR ESTERNO INDOOR INTÉRIEUR INTERNI PAVIMENTOS FLOORING PAVEMENTS PAVIMENTI RECICLABLE RECYCLABLE RECYCLABLE RICICLABILE Emac Complementos S.L. (Spain) [email protected]...