Catalogs >
EMAC >
Novotapajuntas NDA

Novotapajuntas NDA
3Pages

Catalog excerpts

Novotapajuntas NDA Cover plate profile made of anodized aluminum, designed to be installed in expansion joints up to 150 width. It is supplied with stainless steel fixing clips. These clips make easier the installation, avoiding adhesives or traditional fixing screws. Suitable to be placed in all kind of buildings (hospitals, schools, homes...) both outdoors as indoors. Available in matt silver color. General Features Material: Anodized aluminum Finish: Matt silver R03.001_13/11/2013 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. CTE The CTE (Spanish Technical Building Code) in the db-SAE (Actions in building), states that in DE LA EDIFICACION r ° ° concrete or steel buildings the expansion joints shall be installed so that there is no continuos elements longer than 40 m.

Open the catalog to page 1

TECHNICAL FILE Novotapajuntas NDA The Novotapajunta NDA range is a simple solution to cover and protect structural joints in facades, walls or floors with light traffic. The anodized finish guarantee its installation both outdoors as indoors with an excellent performance. The aluminum Novotapajunta NDA range is installed with stainless steel fixing clips, which avoid the use of common adhesives or fixing screws. The number and type of clips depends on the intended use and the profile widht. Thanks to its features, can be installed in new works or in rehabilitation works for big projects...

Open the catalog to page 2

TECHNICAL FILE Novotapajuntas NDA Installation Novotapajuntas NDA is very easy to install using the stainless steel fixing clips supplied. 1. Clean the bottom of the profile, the flooring and the joint hollow. 2. Insert the first clip into the slot on the bottom of the profile. Press the top of the clip with two fingers and snap it into the slot. Without loosing, slide until the desired position and finally loose so the clip stay fixed. 3. Continue inserting the rest of the recommended clips. Insert them alternating the direction of insertion in each clip. 4. Once the clips are installed,...

Open the catalog to page 3