TECHNICAL FICHA TÉC- FILE NICA Novostrip aluminium Profile made of extruded aluminium intended to be installed in stairs, ramps or passage areas with marble, terrazzo or similar floorings, to guarantee safety against eventual falls. Very easy to install. You will only need to make a groove by using a marble saw cutter, and then insert the profile into it. It is recommendable reinforcing the installation with adhesive. Due to its geometry and its small size, it can be installed alone or with other profiles forming a pattern. General Features Material: Natural aluminum Visible height(h): Applications Profile made of natural aluminum with striated visible side. The main function of this profile is as a non-slip element in stairs or ramps made of high thickness floorings such as terrazzo, granite or marble, but it also can be installed in thinner floorings like ceramics. Materials Novostrip Aluminium is a profile made by aluminum extrusion. It is available with natural finish, having its particular natural brightness. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to fire and corrosion. Technical features and tests 6463-T5 Very good Very good Working temperature

TECHNICAL FILE Novostrip Aluminium Installation Novostrip aluminium is a very easy to install profile. 1. Mark the place to install the Novostrip. This profile is intended to be inserted in its full lenght, so it will be necessary to identify the beginning and the end of the position to draw a cutting line. 2. Cut the floor using a 3 mm width blade along the line with a depth not less than 7 mm. 3. Clean the groove and fill it with adhesive (polyurethane mastic or similar) 4. Insert the profile into the groove and be sure it fits perfectly in width and it makes contact with the flooring. 5. Let...