Catalogs >
EMAC >
Novorodapie® Semiflex

Novorodapie® Semiflex
2Pages

Catalog excerpts

TECHNICAL FICHA TÉC- FILE NICA Novorodapie® Semiflex Novorodapie® Semiflex is a made of semi-flexible PVC profile, intended to be installed as a skirting. Its flexibility grade provides it with the hardiness of rigid materials and the adaptability of the flexible ones, so is a highly functional profile. Its geometry, with the lower edge cove shaped, makes easier the cleaning and avoids the accumulation of germ. Available in white and grey colors. General Features Material: White Grey Applications Novorodapie® Semiflex is a profile intended to be installed as a skirting profile. This profile is made of semi-flexible plastic, which gives a superior resistance to flexible PVC profiles but maintaining certain grade of flexibility. The properties of the material and its soft surface, make it a perfect option in areas with common and agressive cleanings. Thanks to its size and geometry is a perfect option for hospitals or nurseries. Novorodapie® Semiflex is appropriate for indoor installations. This profile has not been designed to resist UV, so its installation outdoors may cause fading or yellowing. Novorodapie® Semiflex is a profile made of semi-flexible PVC (polyvinyl chloride). PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption, low electrical conductivity and is dimensionally stable. *Find out more information by consulting the Technical Files of materials in www.emac.es Page 1 o

Open the catalog to page 1

TECHNICAL FILE Novorodapie® Semiflex Installation Novorodapie® Semiflex is an easy-to-install profile that do not need additional fixing screws. 1. Clean the wall to install the Novorodapie® Semiflex and check the profile. 2. Apply part of the adhesive to the wall. Then, apply part of the adhesive on the rear of the profile. You can use contact glue or mounting adhesives. * Be sure the adhesive is appropriate for gluing PVC. 3. Glue the profile to the wall pressing to get an optimal adhesion. 4. Clean the possible adhesive leftover and let dry. *Each adhesive has its own features. Be sure...

Open the catalog to page 2