Catalogs >
EMAC >
Novopletina Safety

Novopletina Safety
2Pages

Catalog excerpts

TECHNICAL FILE Novopletina® Safety Plate profile made of anodized aluminium, matt silver finish, with an insert of non-slip strip with different colors. This plate can be installed as a flooring separator, in entrances, stairs or ramps. The non-slip strip is classified as R13 according to the DIN 51130 standard. Available in four different colors: black, yellow, black/yellow, grey. General Features Material: Anodized aluminium + non-slip strip Applications Plate profile made of anodized aluminium with non-slip strip insert available in five different finishes. This plate can be installed as a flooring separator, in entrances, stairs or ramps... The non-slip strip is classified as R13 according to DIN51130 standard. The color of the strip makes contrast with the flooring and makes the plate suitable to be installed in accesible areas where the visual and tactile contrast are required. Materials Aluminium The base of Novopletina® Safety is a profile made by aluminium extrusion. The silver matt finish has been anodized, improving through this process its corrosion and mechanical resistance and its appearance. The aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile, malleable and highly durable. Non-slip strip The non-slip strip of Novopletina® Safety is made of aluminum oxide in a 0,1 mm. PVC carrier. It stands well outdoors, resists motor oil and water and has a certified slip resistance R13 (according to DIN51130). This non-slip strip is DDA compliant. Page 1 of 2

Open the catalog to page 1

TECHNICAL FILE Novopletina® Safety Technical features and tests Alloy Fire resistance Abrasion resistance Very good Working temperature (*) Water resistance (*) Chemical resistance (*) Sliding resistance (*) Installation Novopletina® Safety is a profile to be installed in any place when the work is finished. It can be installed in two different ways: - Glued: be sure that profile and support are clean and dry. Aply adhesive on the rear of the profile and glue it directly in the desired place. We recommend using polyurethane mastic or similar. - Screwed: you can purchase the profile screwed...

Open the catalog to page 2