BttAC El toque final Novopletina Lumina Plate profile made of anodized aluminium with a photoluminescent strip that serves as a guide in case of sudden absence of light. It can be installed as a flooring separator, in entrances, stairs or ramps and also as a luminous guide in walls. The photoluminescent strip is classified as Class B according to Spanish une 23035-4 standard, and exceeds widely the values required. General Features Material: Anodized aluminium + photoluminescent strip Reference Width (a): Height (h): Lenght (m): Applications Novopletina Lumina can be installed as a flooring separator, in entrances, stairs or ramps... The photoluminescent strip is classified as class B according to the spanish standard une 23035-4. This product can also be installed as a luminous guide in walls to guide evacuation routes. Materials Aluminium The base of Novopletina Lumina is a profile made by extrusion of aluminum. These profiles have been anodized, improving through this process their corrosion and mechanical resistance and their appearance. Aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile, malleable and highly durable. The strip of Novopletina Lumina is a 0,35 mm. thickness polymer with photoluminescent material classified as Class B according to the UNE 23035/4:2003 Standard. Suitable for outdoors and indoors, it can be cleaned with water and neutral soap and does not have significant content of phosphorus or plumb. Does not darken when placed outdoors.

HEMHINlMCHdll:Novopletina LuminaTechnical Features and tests Alloy 6063 AA y ASTM Abrasion resistance Very good Lightfastness Excellent Exposition time Certified values Luminiscence 60 minutes: Decay time: How long does Novopeldano® Lumina glow? FLUORESCENT (4000K/20 lux) Poorly lit areas Hours of visibility until 0,3 mcd/m2 (UNE 23035/4) Exposition time 5 minutes 10 minutes 20 minutes 30 minutes Hours of visibility until 5 mcd/m2 0,46 h 1 h 1,9 h 2,3 h FLUORESCENT (4000K/150 lux) Reasonabily lit areas Exposition time Hours of visibility until 5 mcd/m2 Hours of visibility until 0,3 mcd/m2 (UNE...

TECHNICAL FILE Novopletina Lumina Installation Novopletina Lumina is to be installed in any place when the work is finished. It can be installed in two different ways: - Glued: be sure that profile and support are clean and dry. Aply adhesive on the rear of the profile and glue it directly in the desired place. We recommend using polyurethane mastic or similar. - Screwed: you can purchase the profile screwed for mechanical fixings. Place the profile, mark the holes, drill and fix. Cleaning and maintenance The product must be cleaned periodically with a soft cloth. If you use a neutral liquid...