Novopletina Aluminum DCDC CD CD DOC Striated plate profile made in anodized matt silver aluminum designed to be installed in stairs, ramps or in areas where the safety against falls wants to be assured. This highly resistant profile is delivered with countersunk holes and is easy to install on finished floorings by using fixing screws. It supports intense traffic, acts as a guide for the blinded or partially sighted and also serves to signalize eventual dangers. Anodized matt silver aluminum Matt silver Plate profile made in anodized matt silver aluminum. This profile can be installed as a flooring separator, in entrances, stairs or ramps... It is ideal to be installed in accesible areas where tactile contact is required. A guide path effect can be achieved by placing several Novopletina aluminum. Novopletina® Aluminum is a profile made by aluminum extrusion. The matt silver finish has been anodized, improving through this process its corrosion and mechanical resistance and its appearance. The aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile, malleable and highly durable. Abrasion resistance Very good Lightfastness Excellent Appearance and color EN 12373-1

TECHNICAL FILE Novopletina Aluminum Installation Novopletina Aluminum can be installed in any type of finished floorings. It is delivered with countersunk holes to be fixed with screws. Each 2,5 m profile has 13 countersunk holes. The first is located at 50 mm from the end of the profile, while the rest are at 200 mm between centers. It is recommended a countersunk screw 3,5 x 30 mm. Please, clean the surfaces to install to guarantee a perfect adhesion. After that, place the profile, mark the holes, drill and fix using the appropriate screws. Cleaning and maintenance The product must be cleaned...