Novonivel® Forte Novonivel® Forte is a transition profile with wide face side, whose surface has been striated to offer better resistance to slip. Its reinforced base, allows it to support loads and a high level of transit. This profile is made of anodized aluminium, which makes it suitable to its placement outdoors or indoors. Novonivel® Forte helps to fulfill with the DB-SUA from CTE (Building technical code) and it is available in matt silver. General Features_ Material: Lenght: Dimensions: Packaging: Finishes: Applications Novonivel® Forte is a profile designed to its placement in pavements, to avoid discontinuities safely. This profile has a wide non-slip face side and it is suitable for pedestrian or traffic. Some of its applications, for example, are: - Discontinuities in pavements outdoors or indoors. - Entrances of garages - Entrances of stablishments - Public places. Novonivel® Forte helps to fulfill the DB-SUA document from CTE (Building Technical Code), contributing to save discontinuities less than 2" / 50 mm. with a slope less than 25%. Technical Features and tests 010Z/90/9Z LOO SOU Abrasion resistance: Very good Lightfastness Excellent Appearance and color EN 12373-1 Good (*see graph in next Slip resistance page) UNE env 16333

Novonivel® FortePerformanceof slip resistance Novonivel® Forte * In this graph you can see the comparison between the Rd of the flooring without Novonivel® Forte and the Rd of the flooring with the profile installed. The different areas that conform different classes have been delimited to see clearly the improvement obtained of Rd and of flooring class. Flooring class + Novonivel® Forte 1 1 2 2 Comparison chart Rd and Class R„ Flooring Initia! dass of flooring NoSlc'IOrte * With the help of this chart you can know the Rd and the class of the flooring which will result due to the installation...

TECHNICAL FILE Novonivel® Forte Placement 1. Spread a big amount of gripping material on the surface where you will install the profile. 2. Then, place the profile and press it to let gripping material pass through the mechanized holes of the fixing wing. 3. Place a tile on the fixing wing and press it to achieve an optimal contact with the gripping material. 4. Repeat the process, placing tiles along the fixing wing of the profile. 5. Finally, clean the remaining material and let dry. To see the video, capture this image with your mobile phone (software QR code reader is necessary)or click on...