Catalogs >
EMAC >
Novolistel® 3 Aluminum

Novolistel® 3 Aluminum
4Pages

Catalog excerpts

E*IAC El toque final Profile with squared section, made of aluminum , designed to be installed as a decorative listello, a floor separator or as a stair nosing, among others. This profile is easy to install during the tile work and protects the edges of ceramic installations. It is available in high quality anodized and lacquered colors and also in exclusive ranges of color such as the exclusive Sensations range or with antibacterial properties for the sanitary and health establishments. 0 Reg. 0504253-6 Anodized aluminum Material: Lacquered aluminum *only some finishes a: 3/8" / 10 mm. Packaging: 30 u/box Natural Anodizing: matt and mirror silver, matt/mirror-bright gold, brushed mirror-bright, matt/mirror-bright Finishes: black, matt copper, matt bronze, brushed metal Lacquered: white, matt graphite Sensations range Antibacterial range Applications Novolistel® 3 is the most versatile profile in the markets. It can be installed as: - Decorative listello - Edge protector - Flooring separator* - Stair nosing* or finishing edge (countertops, frame...) *The lacquered finishes are not recommended to be installed in floorings Technical Features and Tests Alloy: Fire resistance: Abrasion resistance*: Very good Appearance and color*: EN 12373-1 *Anodized aluminum Anodized aluminum

Open the catalog to page 1

TECHNICAL FILE Novolistel® 3 Aluminum Complementary pieces Novolistel® 3 has complementary pieces available made of Zamak to get a perfect finish. These pieces can be installed to finish two or three profiles both in horizontal installations as in vertical ones. The geometry of the piece will vary according to the finish. Materials Aluminum Novolistel® 3 is a profile made by extrusion of aluminum. Anodizing improves the corrosion resistance, mechanical resistance and appearance of profiles. It has the quality seal Qualanod, which guarantees the quality of the process and the resulting...

Open the catalog to page 2

TECHNICAL FILE Novolistel® 3 Aluminum As an edge protector 1. Spread a big amount of thin-set mortar on the surface to be tiled. 2. Align the profile with the corner and press it so the thin-set mortar passes through the holes of the anchoring wing. 3. Place tiles on the fixing wing and press them to get an optimal adhesion. 4. Continue tiling the wall. 5. Finally, clean the leftover material, remove the protective film if necessary and let dry. As a flooring separator 1. Spread a big amount of thin-set mortar on the surface to be tiled. 2. Then, place the profile and press it so the...

Open the catalog to page 3

TECHNICAL FILE Cleaning and maintenance The profiles should be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. You can clean the anodized finishes, if dirtiness persists, with a suitable slightly abrasive cleaning products or with specific metal cleaners. The lacquered finishes are more delicate and must be cleaned with neutral detergents using soft cloths with no abrasive particles that could damage the surface treatment. You can obtain a polished finish in natural finishes by using...

Open the catalog to page 4