Catalogs >
EMAC >
Novojunta® Pro SP

Novojunta® Pro SP
3Pages

Catalog excerpts

EftJAC El toque final Novojunta® Pro SP is a system of profiles for expansion joints up to 50 mm width to be installed as an overlapped joint once the flooring is finished. Consists of two reinforced aluminum profiles with holes for the installation with screws with a syntethic rubber between them. Available in grey and black colors. Natural aluminum + synthetic rubber R03.001_28/04/2014 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Technical Features Abrasion resistance Excellent Weatherability Very good Elasticity_Very good

Open the catalog to page 1

TECHNICAL FICHA TÉC- FILE Novojunta® Pro SP NICA Applications The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the DB-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro SP is a solution for...

Open the catalog to page 2

TECHNICAL FILE Novojunta® Pro SP 1. Clean the surfaces to install the profiles 2. Place the profiles aligned to the joint. Be sure the width is the appropriate to later install the rubber. 3. Drill the holes for the fixing screws. 4. Fix the expansion joint with the screws supplied. 5. Insert the rubber in the joint grooves and put it al level with the surface. A rubber hammer could be useful for this purpose. Cleaning and maintenance The cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove...

Open the catalog to page 3