Catalogs >
EMAC >
Novojunta Pro Sisma PE

Novojunta Pro Sisma PE
5Pages

Catalog excerpts

Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. TECHNICAL FILE Novojunta® Pro Sismo PE is an already assembled system of profiles for structural joints, made of silver matt anodized aluminum. Its design allows it to absorb the geometric variations and deformations of constructive elements and it is able to resist seismic movements with total security. This system of profiles for structural joints has been especially designed for areas with high seismic risk. This range of products, a worldwide innovation, has been developed by Emac ® and tested in Technical Independent Institutes of high prestige. Applications Novojunta® Pro Sismo PE is a solution for structural joints, whose main function is to absorb the contraction and expansion movements in three axis, ensuring in this way its optimal performance in earthquakes and avoiding so structural damage in constructions. Its design is adapted to perimeters and encounter areas. To visualize the presentation video of Novojunta® Pro Sismo just click here or scan the QR code.

Open the catalog to page 1

TECHNICAL FILE Novojunta® Pro Sismo PE Introduction The Earth is in constant movement. The litosphere is the surface layer of the solid earth, with high rigidity that it’s constantly moving. An earthquake or quake is a ground shaking caused by the crash of the tectonic plates and the energy release due to the sharp reorganization of the materials of the Earth’s crust when they surpass the state of mechanical balance. The edges of the tectonic plates are areas with high seismic risk, being higher in areas of confluence of several plates. The seismic hazard or destructive potential of...

Open the catalog to page 2

General Features Material: Anodized aluminum Packaging: Finishes: R03.001_29/03/2011 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. A.M: Allowed movement T.A.M: Total allowed movement V.D: Vertical difference * The ability of movement of Novojunta® Pro Sismo PE is between 106.5 and 41.5 mm. ( 4.19" and 1.63") Technical Features and Tests Materials Alloy: 6063 (AA y ASTM) Abrasion resistance: Very good Lightfastness: Excellent Appearance and color: EN 12373-1 Novojunta® Pro Sismo PE...

Open the catalog to page 3

TECHNICAL FILE Novojunta® Pro Sismo PE Standards In Spain, the criteria to be followed for construction and reform, taking into account the seismic action, are under the NCSR-02 Standard: Earthquake Resistant Construction Standard, General Part and Building. This Standard establishes that buildings have to be protected against the collisions with adjacent structures caused by earthquakes. It is considered protected if the distance from de limit line of the building to the potencial impact points is more than the maximum horizontal movement allowed. With regard to the basic principles to the...

Open the catalog to page 4

TECHNICAL FILE Novojunta® Pro Sismo PE Ensure that the pieces stop correctly at the edge of the joint to guarantee a perfect installation. 5. Make the holes for the fastening screws of the piece installed in the ground, so that they match with the holes of the profile. Insert the fastening screws and fix them under the recommendations of the manufacturer. It is recommended to use Fischer Plug SX 6x30 or similar and a DIN 7982 n.4 screw. Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. The recommended...

Open the catalog to page 5