Novojunta® Pro PA SP Wall / wall Novojunta® Pro PA SP is a system of profiles intended to be placed in vertical joints both outdoors (facades) or indoors. This model consists of two aluminum sides drilled for the fixing screws and a central body made of high quality elastomeric rubber with high capacity of movement absorption. This makes the profile the perfect solution for areas with high seismic risk. General features Material: Natural aluminum + elastomeric rubber Length: Finishes: R03.002_24/01/2018 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Applications CTE CODIGO TECNICO DE LA EDIFICAClON The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the db-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro pa SP is a solution specially designed to be placed in vertical joints with big size and high requirements of movement (areas of seismic risk). This profile absorbs the stresses and strains caused in constructive elements, preventing from cracking and other pathologies.

TECHNICAL FICHA TÉC- FILE Novojunta® Pro PA SP NICA Technical Features Aluminum Alloy Fire resistance Abrasion resistance Very good Elastomeric rubber Elongation to tear Break resistance Torsional rigidity Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Other configurations Novojunta® Pro PA SP has an overlapped fixing wing to allow the installation in perimeter joints. Materials Aluminum The side profiles of Novojunta® Pro PA SP are entirely made of aluminum extrusion. TThe aluminum is a raw material...

TECHNICAL FILE Novojunta® Pro PA SP Installation The model Novojunta® Pro PA SP is delivered unmounted and drilled to be fixed with fixing screws. This expansion joint model has an additional functionality as it has two flexible EPDM bands on the rear of the side profiles that help to absorb the possible slope of the walls. To install the profile follow these steps: 1. Be sure that the surface to install the Novojunta® Pro PA SP is free from dust and grease. 2. Mark and drill the holes to install the plugs. 3. Pre-assemble the joint by introducing the rubber on the side profiles. 4. Place the...