Catalogs >
EMAC >
Novojunta® Pro Metal 100

Novojunta® Pro Metal 100
4Pages

Catalog excerpts

ffft h" M Novojunta® Pro Metal 100 is a system of profiles intended to be installed in structural expansion joints. Its design allows it to absorb themal and multidirectional movements, having the ability to move in the three axis. With striated visible side and heavy load support, it is an excellent option for areas with intense traffic. It is delivered preassembled, with installation spacers and protective film. I Applications The buildings and constructive elements are under strains caused by thermal variations. The installa-! tion of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the db-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro Metal 100 is a solution for expansion joints consisting of aluminum sliding pieces. This profile absorbs stresses and strains caused in constructive elements, preventing this way from cracking or other pathologies. Suitable for its installation in floorings. Novojunta® Pro Metal 100 has a striated visible side which gives it antislip properties, suitable for floorings. Its excellent load support makes it perfect for heavy load traffic, fulfilling the most demanding requirements.

Open the catalog to page 1

General Features Material: Length: Finishes: R03.00l_l8/08/2020 Emac Complements, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Perimeter piece Novojunta® Pro Metal 100 has a special piece available for perimeter installations.

Open the catalog to page 2

Novojunta® Pro Metal 100Technical Features Alloy_6063 - T6_ Conformability Very good Corrosion resistance Very good Novojunta® Pro Metal 100 is a system of profiles entirely made by aluminum extrusion. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to fire and corrosion. Aluminum is a high valued raw material and it is widely used in several sectors, specially construction. Its transformation processes are multiple, so it can get very different geometries with high...

Open the catalog to page 3

TECHNICAL DATA SHEET Novojunta® Pro Metal 100 Cleaning and maintenance The cleaning must be done periodically with a soft mop. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. If dirtiness persists, clean the profile with a solution with clean water and detergent or neutral soap 5%, brushing with a mop with no particles that could scratch the finish. Outdoors, rainfall will clean the profile. Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and perchloric),strong bases (caustic soda or...

Open the catalog to page 4