Novojunta Pro® L65 is a system of profiles for expansion joints up to 65 mm width to be installed before the flooring. Consists of two aluminum side profiles drilled on the base to be fixed with screws, two reinforced aluminum profiles and a central piece which supports the central rubber profile. It is delivered pre-assembled and it is available in two different colors. General Features_ Material: Lenght: Finishes: R03.001_10/12/2014 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Applications CTE CODIGO TECNICO DE LA EDIFICAClON The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the db-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta Pro® L65 is a solution for structural expansion joints consisting of two aluminum side profiles drilled on the base to be fixed with screws, two reinforced aluminum profiles and a central pece which supports the rubber profile. This profile absorbs the stresses and strains of constructive elements, preventing from cracking or other pathologies. Novojunta Pro® L65 is to be installed before the flooring, flush to it.

TECHNICAL FILENovojunta Pro® L65Technical Features Alloy6060 (UNE 38350:2001) Abrasion resistance Very good Lightfastness Excellent Weatherability Very good Elasticity Very good The metal profiles of Novojunta Pro® L65 are made by aluminum extrusion. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to fire and corrosion. Aluminum is a high valued raw material and it is widely used in several sectors, specially construction. Its transformation processes are multiple,...

TECHNICAL FILE Novojunta Pro® L65 Cleaning and maintenance The cleaning must be done periodically with a soft mop. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. If dirtiness persists, clean the profile with a solution with clean water and detergent or neutral soap 5%, brushing with a mop with no particles that could scratch the finish. Outdoors, rainfall will clean the profile. Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and perchloric),strong bases (caustic soda or ammonia) or carbonated...