EftJAC El toque final R03.001_22/05/2014 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Novojunta Pro® L55 ******* /■* ifTT ?? »o^o- Ocasional Floor/floor. Light/medium loads. Novojunta Pro® L55 is a system of profiles for expansion joints up to 55 mm width. Consists of two aluminium side profiles drilled on the base to be fixed with screws and a central body made of high quality rubber. It is designed to be placed before the floor installation and supports medium loads. This profile is delivered unmounted and is available in two different colors (grey or black) and finishes (flat or striated). Material: Aluminum + Synthetic rubber The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Code of Building), in the db-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta Pro® L55 is a solution for structural expansion joints consisting of two aluminum profiles holed on their base to receive the screws, together by a rubber with the ability to move. This profile absorbs expansions and contractions caused by constructive elements, preventing the cracking and other pathologies. Suitable to be installed in floors, walls and ceilings. Novojunta Pro® L55 is a flush to the flooring profile, easy to install, which allows traffic of light or medium loads. It is perfect to install once the flooring is installed and in rehabilitation or reform works.

R03.001_22/05/2014 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. TECHNICAL FILENovojunta Pro® L55Technical Features Alloy6060 (UNE 38350:2001) Abrasion resistance Very good Lightfastness Excellent Weatherability Very good Elasticity Very good Aluminium The side profiles of Novojunta Pro® L55 are made by aluminum extrusion. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great...

TECHNICAL FILE Novojunta Pro® L55 Cleaning and maintenance The cleaning must be done periodically with a soft mop. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. If dirtiness persists, clean the profile with a solution with clean water and detergent or neutral soap 5%, brushing with a mop with no particles that could scratch the finish. Outdoors, rainfall will clean the profile. Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and perchloric),strong bases (caustic soda or ammonia) or carbonated...