Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. TECHNICAL FICHA TÉC- DATA SHEET NICA Novojunta® Pro Aluminium PLUS SP Occasional Novojunta® Pro Aluminium PLUS SP is a system of profiles for expansion joints up to 50 mm width, to be installed flush to the flooring once the flooring is installed. It consists of two aluminium profiles with holes for the fixing screws and a central part made of high quality EPDM rubber that it is inserted into the aluminum profiles. Available in two different finishes (flat and striated) and two colors. Applications The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Code of Building), in the DB-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro Aluminium PLUS SP is a solution for structural expansion joints consisting of two overlapping aluminum profiles with a central piece made of EPDM rubber with the ability to move. This profile absorbs expansions and contractions caused by constructive elements, preventing the cracking and other pathologies. Suitable to be installed in floors, walls and ceilings. Novojunta® Pro Aluminium PLUS SP is to be installed flush to the flooring and allows traffic of medium loads. It is perfect to install once the flooring is installed and in rehabilitation or reform works. 1

EMAC®GRC SPAIN USA ITALY General Features Material: Aluminum+ EPDM Length: Finishes: *Choose color and finish R03.001_22/02/2023 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Perimeter piece Novojunta® Pro Aluminium PLUS SP has a special piece to install the perimeter option (reversible) Technical Features Hardness 65 shore A astmd2240 Weatherability Very good Ozone resistance Excellent ASTM D1149 Elongation to break 300% ASTM D412 Breaking load 10 Mpa ASTM D412 Tensile strength 27 N/mm ASTM D624 die...

TECHNICAL FICHA TÉC- DATA SHEET Novojunta® Pro Aluminium PLUS SP NICA Materials Aluminium The side profiles of Novojunta® Pro Aluminium PLUS SP are manufactured by aluminum extrusion. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to fire and corrosion. Aluminum is a high valued raw material and it is widely used in several sectors, specially construction. Its transformation processes are multiple, so it can get very different geometries with high performance. This is...

E AC The final touch lUP I SPAIN USA I ITALY TECHNICAL DATA SHEETNovojunta® Pro Aluminium PLUS SP Technical information You can find out more information about the technical features of the Emac®'s products by downloading its Technical Files in www.emac.es. If you have any query, please contact our Technical Department in [email protected]. R03.001_22/02/2023 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. 'InF PAVIMENTOS OUTDOOR INDOOR FLOORING EXTERIEUR INTERIEUR PAVEMENTS ESTERNO INTERNI PAVIMENT PAREDES...