EMAC El toque final Novojunta® 1 is a solution for expansion joints made by coextrusion of PVC. The combination of both materials, rigid and flexible, is perfect to absorb expansions and contractions in tiled floorings and walls, avoiding the apparition of possible pathologies. Ideal to be installed outdoors or indoors in all kind of projects. It has been specially designed to be installed with high thickness floorings such as marble, terrazzo, etc. General Features Packaging: _ . . *Please check availability of color accordine to height M.A: Movement allowed T.M.A: Total movement allowed Applications Novojunta® 1 is a solution for expansion joints whose main function is absorbing expansions and contractions in tiled floorings or walls to avoid the apparition of pathologies. It can be installed vertically or horizontally both in floorings as in walls. Technical Features and Tests Fire resistance M2 (NBE-CPI-96) Abrasion resistance Very good ©| Good resistance except to chromic, nitric Chemical resistance and sulphuric concentrated acids and aimplas organic solvents like acetate or toluene.

Materials ©PVC Novojunta® 1 is a profile made by coextrusion of PVC-P (rigid PVC) and PVC-U (flexible PVC). PVC-U allow the profile to absorb expansion and contraction movements from floor and wall tiling where is installed and pvc-p is suitable, due to its rigidity, to the support of the tile. El PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption, low electrical conductivity and is dimensionally stable. Recommendations of installation Emac®, in...

To see the video, capture this image with your mobile phone (QR code reader software is necessary) or click on it. Spread a big amount of mortar or similar on the surface to be tiled Then, do the tiling until the place to install the Novojunta® 1 Install the profile longitudinally aligning it with the edge of the tiles anf fixing it well to the mortar Continue with the tiling work to complete the installation. Before the curing, tap softly with a rubber hammer to align the profile with the surface of the floor. Finally clean the leftover material and let dry If you want to polish the floor, check...