BffAC El toque final Novoescuadra PlusStainless steel Profile with wide visible side and smoothed curve made of stainless steel AISI 304. It has been designed to be installed in edges of tiled walls to protect them from bumps and scratches. To be installed before the wall tiling, once installed remains at level with the wall and perfectly integrated to the whole installation. Ideal for areas with demanding hygiene requirements such as hospitals, schools, universities... General Features Material: Lenght: Dimensions: Packaging: Finishes: 10 u/box High brightness High brightness Applications Novoescuadra Plus Stainless steel is a profile designed to be installed as an edge protector in walls. The wide visible side makes it perfect to protect from bumps and scratches and the smooth surface of stainless steel if perfect for places with hygiene requirements. Materials Stainless steel Novoescuadra Plus Stainless Steel is a profile made of stainless steel AISI-304 alloy. All material batches are tested with the composition test to determine that they fulfill with the specification of the alloy. Stainless steel used in the Emac® products has been also tested with salt spray test, exceeding 500 hours of exposition without signs of corrosion. Stainless steel is a highly durable and resistent material, with an excellent superficial appearance that does not degrade along the time. Available in high brightness and brushed finishes. This finish is slightly porous and smooth, making easier the hygiene of the installation.

TECHNICAL FILE Novoescuadra Plus Stainless steel Technical Features and tests Alloy AISI-304 Composition test for each batch Corrosion resistance Salt spray test + 504 hours without change (inox) Installation 1. Before installing the tiles, apply glue mortar on the surfaces where the profile is to be installed. 2. Place the profile against the wall and align it to the corner. Then press the profile to make the mortar pass through the holes of the fixing wing. 3. Then, place the tiles on the fixing wing and press them so we can get a perfect contact and adhesion. 4. Finally clean the leftover...