TECHNICAL DATA SHEET *Informative warning *Advertencia informativa Novoescuadra Eclipse® Sunset The new Eclipse® Sunset collection was born to create the effect of the sunset in the different spaces where it is installed, creating sensations of calm and comfort through the use of light. Novoescuadra Eclipse® Sunset is a profile for vertical or horizontal installation as a decorative listel on walls and ceilings. Its geometry, with a clip-on trim profile, is designed for the hidden placement of LED strips towards the wall, allowing the lighting to flow on both sides of the profile and generating an innovative light curtain effect. This effect contributes to the creation of warm and relaxed atmospheres, generating a sense of depth in the environment with a high decorative charge. Novoescuadra Eclipse® Sunset is a system that adapts to coatings between 8 and 13 mm, covering most market needs. It is available in matt black and silver anodized finishes and matt white lacquered finish. *Promotional image made with a product from the EMAC®’s Eclipse® collection, reflecting a suggested use option for this product. EMAC® does not manufacture, sell or supply any LED strip with any product in the Eclipse® collection. The choice of the LED strip must be made by the installer according to the circumstances of the installation si

EMAC® GROUP I SPAIN USA ITALY TECHNICAL DATA SHEETNovoescuadra Eclipse® Sunset c Material: Length: Base: natural aluminum Trim: anodized/lacquered aluminum Matt silver -13 Matt black - 90 Applications Novoescuadra Eclipse® Sunset is a profile manufactured in two pieces: a natural aluminum base and a trim cover available in two anodized aluminum colors (matt silver and matt black) and one in lacquered aluminum (matt white). This innovative corner protection profile has been designed to adapt to walls and ceilings with different wall thicknesses. The profile can be illuminated with LED strips,...

Novoescuadra Eclipse® Sunset E pAC The final touch Novoescuadra Eclipse® Sunset is a system composed of two profiles that is supplied disassembled and installed on site. 1. First install the base of the system. Spread plenty of thin-set mortar on the surface of the wall where the profile will be placed. 2. Position the base profile of the Novolistel Eclipse® Sunset system and allow the thin-set mortar to pass through the holes of the fixing flange. 3. Place the cladding along the fixing flange pressing for optimum adhesion. Make sure that the inner recess of the base profile is free of any dirt...