ACCESSIBILITY & Safety SOLUTIONS ACCESSIBILITY & Safety SOLUTIONS Novopeldaño® Safety Novopeldaño® Lumina Stair nosing to be installed after tiling, made of anodized aluminum silver matt finish. This profile has a nonslip strip that helps to fulfill the DB-SUA from CTE (Spanish Technical Building Code) as it improves the value of slip resistance of the flooring where it is installed. Stair nosing to be installed after tiling work, made of anodized aluminum silver matt finish. This profile has a luminescent strip useful as a guide in case of sudden darkness. With striated surface, it is light and easy to install after tiling. The non-slip strip is classified as R13 according to the DIN 51130 standard. Available in four different colors: black, yellow, black/yellow, grey. The photoluminescent strip exceeds the requirements of luminescence (class B) of UNE 23035/4:2003 standard related to photoluminescent marking systems in fire safety. The contrast between the profile and the band guarantee its adaptation to the Accessibility Guidelines. Novopeldaño® Safety Plus Stair nosing profile made of anodized aluminum, to be installed during the tiling. This profile has a non-slip strip which helps to fulfill accessibility requirements and improves the slip resistance value of the flooring. The non-slip strip is classified as R13 according to the DIN 51130 standard. Available in four different colors: black, yellow, black/yellow, grey. Novopeldaño® Lumina Plus Profile designed to be installed as a stair nosing protector. This profile has a photoluminescent strip that acts as a guide in case of sudden darkness. It is installed before the tile work. The photoluminescent strip exceeds the requirements of luminescence (class B) of UNE 23035/4:2003 standard related to photoluminescent marking systems in fire safety. The contrast between the profile and the band guarantee its adaptation to the Accessibility Guidelines. a: 44 mm AD: 30 mm h: 10/12 mm Novopletina® Lumina Novopletina® Safety Plate profile made of anodized aluminium, matt silver finish, with an insert of non-slip strip with different colors. This plate can be installed as a flooring separator, in entrances, stairs or ramps... The non-slip strip is classified as R13 according to the DIN 51130 standard. Available in four different colors: black, yellow, black/yellow, grey. Plate profile made of anodized aluminium with a photoluminescent strip that serves as a guide in case of sudden absence of light. It can be installed as a flooring separator, in entrances, stairs or ramps and also as a luminous guide in walls. The photoluminescent strip exceeds the requirements of luminescence (class B) of UNE 23035/4:2003 standard related to photoluminescent marking systems in fire safety. a: 42 mm F: 30 mm h: 2,5 mm Novopletina aluminium is a striated plate profile made in anodized matt silver aluminum designed to be installed in stairs, ramps or in areas where the safety against falls wants to be assured. This highly resistant profile is delivered with countersunk holes and is easy to install on finished floorings by using fixing screws. Novopletina® st. steel with non-slip surface is for stair nosing and ramps. Its installation does not require work so it is a profile suitable for rehabilitation or reform works. ALUMINIO ACERO INOXIDABLE Novostrip SP is a profile made of extruded aluminium intended to be installed in stairs, ramps or passage areas with marble, terrazzo or similar floorings, to guarantee safety against eventual falls. This profile is easy to install on finished floorings, it will be enough by applying adhesive. Due to its geometry, it’s ideal for installing it in any environment, specially in old areas which need a better safety transit in already tiled stairs. Thanks to its tiny design, can be integrated on the flooring. Available in matt silver and champagne finishes, two colors wich perfectly fits with the latest trends. Novostrip is a profile made of extruded aluminium intended to be installed in stairs, ramps or passage areas with marble, terrazzo or similar floorings, to guarantee safety against eventual falls. Very easy to install. You will only need to make a groove by using a marble saw cutter, and then insert the profile into it. It is recommendable reinforcing the installation with adhesive. NOVOSTRIP SP NOVOSTRIP MARBLE NOVOSTRIP CERAMIC Novonivel® Forte Transition profile with wide face side, whose surface has been striated to offer better resistance to slip. Its reinforced base, allows it to support loads and a high level of transit. Novonivel® Access EMAC® Group Valencia, Spain www.emac.es | [email protected] | Tel. (+34) 961 532 200 Available in anodized aluminum silver mat color with protective film. Novonivel® Forte helps to fulfill with the DB-SUA from CTE (Building technical code) and it is available in matt silver. Transition profile made of aluminum and designed to avoid discontinuities in the pavement. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Delivered with countersunk holes to improve its fixing by using screws (not included). The inner part is reinforced to improve its load support. Miami, Florida www.emac-america.com | [email protected] | Phone: # (305) 406 1593 Construction Division - EMAC®: Sassuolo (Mo), Italia www.emac-italia.it | [email protected] | Tel. (+39) 0536994854 Artistic Division – ®Artelux www.arteluxcontract.com | www.artelux.es | [email protected] Tel.

aPPLICATION EXAMPLES OF PODOTACTILE SYSTEM PODOTACTILE SYSTEM Novoband Access Aluminium Guidance path • Guidance bands 3 mm high • Total guidance bands width and number of parallel bands as per regulations. In the example, 4 bands and width greater than 40 cm Today’s world is a dynamic one, so the movement of people across the length and breadth of countries has become a right. That is why different facilities must be conditioned so all individuals may enjoy them equally. People experience many diverse situations in their lifetime. For example, you may use crutches or a wheelchair temporally after...