Catalogs >
EMAC >
Novojunta® Pro WP80

Novojunta® Pro WP80
3Pages

Catalog excerpts

Novojunta® Pro WP80 is a system for structural watertight joints made of stainless steel and epdm (synthetic rubber) with a steel structure. The system includes an additional Wolfin IB foil, which is compatible with bituminous layers or PVC membranes to be installed in waterproofing installations. Installation with metallic screws. Supports heavy loads. Steel + membrane + stainless steel Length: Finishes: R03.001_05/05/2014 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Technical features Abrasion resistance Excellent Weatherability Very good Corrosion resistance Excellent

Open the catalog to page 1

TECHNICAL FICHA TÉC- FILE Novojunta® Pro WP80 NICA Applications The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the DB-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro WP80 is a solution for...

Open the catalog to page 2

TECHNICAL FILE Novojunta® Pro WP80 4. Then insert the EPDM synthetic rubber 5. Place again the stainless steel profiles and fix them with the screws. 6. Join the Wolfin IB membrane to the existing waterproofing system. Keep them overlapped. Apply the flame on the waterproofing, not on the Wolfin IB membrane. 7. The expansion joint is finally installed. Cleaning and maintenance The cleaning must be done periodically with a soft mop. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. If dirtiness persists, clean the profile with...

Open the catalog to page 3