video corpo

Novojunta® Pro L50
3Pages

{{requestButtons}}

Catalog excerpts

Novojunta® Pro L50 - 1

EftJAC El toque final Novojunta® Pro L50 is a system of profiles for expansion joints up to 50 mm width. Consists of two aluminium side profiles drilled on the base to be fixed with screws and a central body made of high quality rubber. This profile is delivered unmounted and is available in two different colors (grey or black) and finishes (flat or striated). General Features Material: Lenght: Finishes: R03.001_20/01/2016 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Applications CTE CODIGO TECNICO DE LA EDIFICAClON The buildings and constructive elements are under strains caused by thermal variations. The installation of expansion joints helps to minimize the effects that these variations cause in the whole building, preventing a possible structural damage. The CTE (Spanish Technical Building Code), in the db-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro L50 is a solution for structural expansion joints consisting of two aluminium pieces drilled on the base to be fixed with screws joined by a central piece made of rubber with abilitity to move. This profile absorbs the stresses and strains of constructive elements, preventing from cracking or other pathologies. Novojunta® Pro L50 is a functional profile for expansion joints, very easy to install, which fits the most common expansion joints in building. To be installed before the flooring, flush to it.

Open the catalog to page 1
Novojunta® Pro L50 - 2

R03.001_20/01/2016 Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Novojunta® Pro L50Technical Features Alloy6060 (UNE 38350:2001) Abrasion resistance Very good Lightfastness Excellent Weatherability Very good Elasticity Very good Aluminium The side profiles of Novojunta® Pro L50 are made by aluminum extrusion. The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to...

Open the catalog to page 2
Novojunta® Pro L50 - 3

TECHNICAL FILE Novojunta® Pro L50 Cleaning and maintenance The cleaning must be done periodically with a soft mop. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry to remove excess moisture. If dirtiness persists, clean the profile with a solution with clean water and detergent or neutral soap 5%, brushing with a mop with no particles that could scratch the finish. Outdoors, rainfall will clean the profile. Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and perchloric),strong bases (caustic soda or ammonia) or...

Open the catalog to page 3

All EMAC catalogs and technical brochures

  1. Maxi Catalogue

    16 Pages

  2. Novostrip SP

    3 Pages

  3. Novolistel 3

    3 Pages

  4. METHACRYLATE

    2 Pages

  5. BRASS

    3 Pages

  6. Novoperi

    2 Pages

Archived catalogs

  1. TRENDS 2015

    15 Pages

  2. TRENDS 2014

    15 Pages