Catalogs >
EMAC >
Novojunta® Pro Decor

Novojunta® Pro Decor
3Pages

Catalog excerpts

TECHNICAL FILE Novojunta® Pro Decor Novojunta® Pro Decor is a trim profile intended to be placed in structural joints. It is made of anodized aluminium, 6063 alloy, with a central body made of porous EPDM, which allows to absorb the stresses and strains caused due to thermal variations in buildings. Its face side is striated so it has non-slip properties. It is delivered preensambled and it is easy to install. It is available in color anodized matt silver. Anodized aluminium Emac Complementos, S.L. reserves the right to make at any time modifications to the geometry profile or the specifications of his products. Matt silver Matt silver Applications Buildings and constructive elements are under strains caused by thermal variations outdoors. The installation of expansion joints helps to minimize the effects that these variations have in the hole building, preventing the apparition of structural damage. The CTE (Spanish Technical Code of Building), in the DB-SAE (Document about actions in building), states that in steel or concrete buildings is necessary not to let continuous elements longer than forty meters without installing expansion joints. Novojunta® Pro Decor is a solution for structural joints made of an structure of anodized aluminium and a central body made of EPDM. This profile absorb stresses and strains caused in constructive elements, preventing the apparition of scratches or other damages. It can be place horizontal and vertically both walls and floors. Its manufacturing, made of anodized aluminium certified by Qualanod, allows its installation outdoors or indoors guaranteing a high resistances an durability. Novojunta® Pro Decor is a suitable profile for its installation in Malls, parkings, airports and all kind of public or private buildings. Its face side has the surface striated which gives it non-slip properties. This makes the profile perfect for its installation in floors. Due to its size, it can be installed as a trim with joint witdhs from 12,6 mm. up to 30 mm. (0,47’ - 1,

Open the catalog to page 1

TECHNICAL FILE Novojunta® Pro Decor Technical Features Alloy: Fire resistance: Abrasion resistance: Very good Materials Aluminium Novojunta® Pro Decor is a profile made by extrusion of aluminium. The matt silver finish has been anodized, improving mainly through this process their corrosion resistance, mechanical resistance and appearance. The anodized applied has the quality seal Qualanod, which guarantees the quality of the process and the resulting profiles. This seal regulates several tests: appearance and color, thickness measurements, sealing and impregnation control, abrasion...

Open the catalog to page 2

TECHNICAL FILE Novojunta® Pro Decor b) For joint width up to 30 mm (1,18’) 1. Apply silicone or a mastic in one of the toothed exterior sides of the body of Novojunta® Pro Decor. 2. Insert the Novojunta® Pro Decor in the hollow of the joint, ensuring it makes a good contact to achieve a firmly union. 3. Clean the possible remaining material, remove the protective film and let dry. Novojunta® Pro Decor in width joint up to 30 mm. (1,18’) with fixing. c) If you want to ensure the fixing of Novojunta® Pro Decor, you can do it through mechanical fixing. Install plugs type Fischer SX 6x30 or...

Open the catalog to page 3