video corpo

BRASS
3Pages

{{requestButtons}}

Catalog excerpts

BRASS - 1

TECHNICAL FILE BRASS The brass is an copper and zinc alloy with multiple industrial applications. This material is easy to mechanize, engrave and melt. It is resistant to corrosion, saline conditions and is ductile, so it can be transformed through several processes. The Emac® profiles made of brass have been manufactured by extrusion, obtaining so a highly accurate dimensional tolerance. This guarantees its optimal appearance and functionality. Technical Features Mechanical Ductilidad Mechanical resistance Tensile strenght Corrosion resistance 100% in hot bending 30% in cold bending Physical Density Fire resistance M0 according to UNE 23-727-90 Non combustible against thermal action Antibacterial properties Working temperature Applications Brass is a material with multiple applications in industry. Its good properties physical-mechanical and its characteristic color are to be used in different applications, for example imitation jewelry, decoration articles, industrial products, pieces of marine use, musical instruments, etc. Emac® has a wide range of products made of brass in its catalog, which belong to different product families. The physical-mechanical properties of brass, provide it with the strenght required to be placed on floor and wall tiling indistinctly and offer an optimal protection of the installations. The golden finish of brass is a high added aesthetic value to our profiles, and brings elegance and exclusivity to the environments where it is installed. The product families Novosuelo, Novocanto®, Novolistel® , Novojunta® y Novosepara, have products made of brass available.

Open the catalog to page 1
BRASS - 2

TECHNICAL FILE BRASS Cleaning and maintenance The Brass, in a natural form, acquires a dull brown color when in contact with aire. To its cleaning there are several products in the market which can be used, even though sometimes can be cleaned with natural acid brushing with lemon and salt. Some of these products are: - Polishers: Maintain the brass brilliance. These products does not leave any smell in the hands and are easy to use. For its application, moisten a cloth with the product and brush the profile until the superficial discolored layer is removed. Then, use a dry cloth to a...

Open the catalog to page 2
BRASS - 3

TECHNICAL FILE BRASS - Varnish There are different specific options of lacquer and varnish in the market, which are destinated to their use with metals. They are classified depending on its application: - Spray varnishing: To apply this type of varnishing, pay attention to the instructions of use specified on the packaging. Spray at a distance of approximately 25 cm. the profile. Do not apply at a smaller distance or in a big amount because it can form drops that will leave a bad finish on the surface. Once the first hand is dry, repeat the process. - Varnishing with a brush: Use a big and...

Open the catalog to page 3

All EMAC catalogs and technical brochures

  1. Maxi Catalogue

    16 Pages

  2. Novostrip SP

    3 Pages

  3. Novolistel 3

    3 Pages

  4. METHACRYLATE

    2 Pages

  5. Novoperi

    2 Pages

Archived catalogs

  1. TRENDS 2015

    15 Pages

  2. TRENDS 2014

    15 Pages