About Fleximent® 201 Fleximent® 201 is a two-component, flexible cementitious waterproof coating comprising of a proprietary synthetic resin dispersion and a blend of selected cement and graded fillers. Once cured, the membrane allows entrapped water vapour to escape but yet remain impermeable to water. Advantages • Flexible, adheres to most surfaces and fills hairline cracks • Excellent resistance to wear, weather, abrasion, aggressive soils and contaminated ground water. • Acts as an effective waterproof coating for floors, walls, water retaining structures and planter boxes. Benefits Fleximent® 201 acts as an effective waterproof coating for floors, walls, water retaining structures and planter boxes. Fleximent® 201 may be applied onto surfaces in contact with potable water and damp surfaces. It contains no chlorine and salts that cause corrosion and efflorescence and is resistant to frost and thawing salts. Meets BS 6920:90 Fleximent® 201 meets the requirements of British Standard BS 6920:90 and Singapore Standard SS 375:94 for suitability of products in contact with water intended for human consumption.

Installation Procedures Surfaces should be clean, free from honeycombs, voids, dirt, loose material, paint, oil, curing agents or other contaminants. Prior to application, dampen substrate with a brush or roller. a. Pour Part A (liquid) into a clean container. b. Pour Part B (powder) slowly into Part A. c. Mix with a low speed drill fitted with purpose-made paddle d. Ensure that mix is homogeneous and lump-free. Apply Fleximent® 201 by squeegee, roller or brush to horizontal and vertical surfaces. Ensure that air is not entrapped in the membrane. Apply slurry with a brush at joints and corners...