Eurathane® 3000Seamless Elastomeric Waterproof Coating About Eurathane® 3000 Eurathane® 3000 is a UV-resistant, high solids and high performance, single-component moisture-cured polyurethane waterproof coating. It is cold-applied directly by brush, roller, squeegee, or trowel, to form a seamless elastomeric waterproofing coating. Eurathane® 3000 may be applied over concrete, stone, brick, cement blocks, wood, metal, asbestos and most other surfaces. Advantages • Excellent flexibility and elongation • Maintains a waterproof seal over a wide range of temperatures • Easily applied to complex and irregular shapes to form a seamless waterproofing coating • Low VOC Meets ASTM 836 Eurathane® 3000 provides an effective waterproofing coating for floors, walls and water retaining structures. It is a damp-proof membrane in sandwich constructions in accordance with BS 8102:2009 (Code of Practice for protection of below ground structures against water from the ground). Benefits Eurathane® 3000 provides effective external protection against aggressive soils and contaminated ground water. It adheres to most building surfaces including concrete, felt and metal, whether horizontal or vertical.

Eurathane® 3000 should be applied by brush, roller, squeegee or trowel to obtain a continuous, unbroken film. It should be applied at a rate of 0.75 litre/m2/coat. Two coats are recommended, allowing the first to fully dry prior to application of the second. A dry film thickness of 1.0 mm to 1.2 mm is recommended. Extremely porous substrates should be primed with a high penetration solvent-based polyurethane primer prior to coating. Application must be made uniformly to avoid pin holes. As with all waterproofing treatments, it is essential that Eurathane® 3000 is protected from mechanical damage...