Elmich F100 Reinforcement Tape High-Adhesive Butyl Tape with Fleece Elmich F100 Reinforcement Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in polypropylene. The tape has been developed for applications where it is both necessary to have a high adhesion property, featuring a finished, smooth, absorbing surface. The tape consists of easy peel siliconized release paper: both release paper edges exceed some millimeters from the tape itself, featuring an easy removable release paper. Elmich F100 Reinforcement Tape is compatible with common glues (cement and non-cement based adhesives) and it is ideal to be used under wood, marble, ceramic etc. coverings. Elmich F100 Reinforcement Tape adheres strongly to all materials and especially to plastic, glass, steel, polycarbonate, wood and bitumen. The product must be protected from U.V. exposure. Excellent adhesive properties Excellent heat stability Excellent adhesion at low temperatures High workability, plasticity and deformability Solvents free Easy peel Uses The product has been designed to seal joint between the floor slab and wall, both for bricks, concrete and gypsum surfaces. Thanks to its ease of handling, plasticity and deformability, Elmich F100 Reinforcement Tape can be used in small and reduced feasabl

Prepare the surface and proceed as follows: • The surface should be clean, dry, smooth and dust-free • Unroll the tape until the desired length is reached • Remove the silicone release film that covers the adhesive part of the tape and position Elmich F100 Reinforcement Tape. • Press with a roller or a cloth pad Storage: The quality and the characteristics of materials remain unaltered for a very long time. It is however best to use the product within 12 months. For correct storage, a dry, covered place is best at a temperature between +5°C and +40°C. Storage above 50°C may lead to difficulties...