Catalogs >
ELKO >
JS-10 "HARMONY"

JS-10 "HARMONY"
1Pages

Catalog excerpts

44 PIR motion detector JS-10 „HARMONY“ COMPONENTS OF EZS Technical parameters: Supply voltage/current: Detection distance: Detection angle: Motion detection: Recomended hight of mounting: Signal processing: Alarm output: Auxiliary output OUT: Cover contact TAMPER: Time of activation after it is switched on: Operation temperature: High-frequency resistance: Max. cable size: Instalation: Dimensions: Weight: Tested according to EN55022, ÈSN EN 60801-2 (IEC801-2), IEC801-3, IEC801-4 Sensor is classifi ed by a test room EZS as a device for indoor safety with higher risk (II. category) 9 -15 V DC /max. 30 mA 12 m 120° 0,1 m/s - 4 m/s 2 or 2,5 m above the fl oor level digital analysis of 8 bit.processor with three adjustable levels relay ALARM optionally switching (NO)/breaking (NC) 60V/0,1A switching contact of relay 60 V / 0,1 A DC 60 V / 0,1 A DC max. 90 sec. - 10 to +55 °C up to 1 GHz 20 V/m (modulated fi eld) 1 mm2 level surface mounting 70 x 90 x 65 mm 120 g Supply voltage/current: Detection distance: Detection angle: Recomended hight of mounting: Time of activation after it is switched on: Loadability of output PIR: Loadability of sabotage output TMP: Environment according to ÈSN EN 50131-1: Operation temperature: Classifi cation according to ÈSN EN 50131: Max. cable size: Instalation: Dimensions: Weight: 12 V DC 25% /max. 35 mA 12 m 120° (with standard lens) 2,5 m above fl oor level max. 180 s switch max. 60V / 50 mA internal resistance max. 30 Ù switch max. 60 V / 50 mA internal resistance max.16 Ù internal general -10 to +55 °C level 2. ( medium-low) 1 mm2 level surface mounting 110 x 60 x 55 mm 120 g Technical parameters: PIR motion detector JS-20 „LARGO“

Open the catalog to page 1