THE NEWS IN PORTFOLIO PRODUCT 2009 INELS RF CONTROL RELAYS

Switching actuator 12 fold SA2-012M Switching two-chanel unit SA2-012M is designated for switching of up to 12 independent appliances and loads (thermo-electric valve, resistive load, heating mats, etc.). SA2- 012M contains 12 independent relays with NO potential-free contact, each group of four relays switch the same potential. Maximal loadability of contact is 8 A/2000 VA/AC1. Each of output contact is individually controllable and addressable. LED diodes on front panel signalizes state of each output. By control buttons on the front panel, it is possible to independently change state of individual...

Relays Switching power supply PS PS-10: switching stabilized power supplies with ! xed output voltage, version 1-module. PS-10-12 is stabilized power supply 12V/10W. PS-10-24 is stabilized power supply 24V/10W PS-30: switching stabilized power supplies, version 3- module. PS-30-12 is stabilized power supply with ! xed output voltage 12V/30W. PS-30-24 is stabilized power supply with ! xed output voltage 24V/30W. PS-100: stabilized power supply with ! xed output voltage, version 6-module. PS-100-12 is stabilized power supply 12V/100W. PS-100-24i is stabilized power supply 24V/100W. Output current...

RF Control Wall button RFWB-20, RFWB-40 is designated for control of RF Control receivers. Transmission of radio messages is ensured by one-way communication between receiver and transceiver. It is limited in$ uencing of RF components by addressing individual RF devices, which as a part of their communication protocol, transmit unique address (repetition probability of such address is 1:65000). Sensors can control unlimited number of assigned actuators in the same time, in case they are in the range of RF - signal. Radio signal range for RF installation depends on materials used for building...