- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
elezio Technical sheet SYSTEM 7
elezio Technical sheet SYSTEM 7
The Elezio Swing Door System is designed for doors with a thickness of 74mm. It includes a steel mounting plate for sealing and floor, and features upper and lower stainless steel swivels with aluminum inserts. The system allows for a 180° rotation with stops at 90°, 0°, and -90°. It supports doors weighing up to 200 kilos, with a maximum height of 3 meters and width of 1.50 meters. The system is easy to install and does not require embedding in the floor or ceiling.
Procedures:
Installation involves ensuring the correct door manufacturing measurements, with a gap of 6mm (Y) and 12mm (X). The system is designed to be flush with the wall.
Materials:
The door system uses a solid core door with a thickness of 74mm. Additional materials include laminate for painting (0.8mm thickness), medium (12mm thickness), and exotic wood for the frame.
Installation Configurations:
The system can be installed in both plaster block and plasterboard configurations. It features an invisible system design and is made in France.
Contact Information:
Eleizo, 38 rue Vaneau, 75007 Paris. Email: [email protected], Phone: 01 85 09 60 40, Website: www.elezio.fr
Catalog excerpts
La porte devient invisible. Technical sheet The door becomes invisible
Open the catalog to page 1
SWING DOOR SYSTEM UPPER stainless steel swivel & aluminium inserted into the door. Steel mounting plate for sealing & floor. LOWER stainless steel swivel & aluminium inserted into the door. Aluminium profile Drealing template SYSTEM 7 The 7 Elezio system adapts to doors 74mm thick. This pivoting door system is pre-set so you don’t have to worry about it anymore. The plates allow a 180° rotation with a stop at 90° 0° -90°. The door can reach up to 200 kilos, 3 meters high and 1.50 meters wide. Flush with the wall Nothing to embed in the floor or in the ceiling. Fiche technique Elezi
Open the catalog to page 3
SCHEMATIC DIAGRAM WARNING Be sure to observe the door manufacturing sets for the measurement. *Jeu/jeux = Gap *Haut = Upper *Bas = Low Solid core door 74 mm Door wrist Fiche technique Elezio
Open the catalog to page 4
SCHEMATIC DIAGRAM Upper pivot Solid core door 74 mm Solid core door 74 mm Door wrist Lower pivot Laminate to paint Thickness 0,8 mm Fiche technique Elezio Frame Exotic wood
Open the catalog to page 5
PROFIL INSTALLATION Plaster block configuration Plasterboard configuration Plaster block Swivelling door Swivelling door PLAN FRAISAGE Invisible system Fiche technique Elezio
Open the catalog to page 6
38, rue Vaneau 75007 Paris [email protected] www.elezio.fr
Open the catalog to page 8
