*myarchiexpo

NANO SPLASHER

Product catalog summary

Product Overview:
The Nano Splasher is a fully titanium "Plug & Play" heater designed for both soft and hard-sided splasher pools. It is available in 2-kW and 3-kW models, offering easy installation with a robust and durable construction. The heater ensures maximum safety, reliability, and efficiency with features like a reliable flow switch, temperature thermostat, and overheating sensor.

Key Features:

Available in 2-kW and 3-kW models.
Easy installation with pre-wired setup.
Durable titanium construction for both the flow tube and heating element.
Analogue control with a 1.2°C differential.
Silent operation with 100% efficiency throughout its life.
Can be mounted on the floor or vertically on a wall.

Specifications:

Power Supply: 220-240V, single-phase.
Flow Requirements: Minimum 1m³/h, Maximum 17m³/h.
Control Thermostat: Analogue, 0 > 45°C with a 1.2°C differential.
Safety Thermal Cut Out: 60°C with manual reset.
Flow Switch: Gold tipped reed switch with titanium fulcrum pin.
Water Connections: 1.5” BSP female thread with ABS unions and hose tails.
International Protection Marking: IP44.
Frequency: 50/60 Hz.
Working Pressure: Maximum 4 bar.

Models and Product Codes:

2-kW Model: N-AGP-UK-T2* (UK Plug), N-AGP-EU-T2* (Euro Plug).
3-kW Model: N-AGP-UK-T* (UK Plug), N-AGP-EU-T* (Euro Plug).
Note: Sold in packs of 6 pieces.

Pressure Drop:
The pressure drop is minimal across various flow rates, ensuring efficient operation up to 3-kW.

Catalog excerpts

Unit 11, Gunnels Wood Park, Stevenage, Hertfordshire SG1 2BH [email protected] | +44 (0) 1438 749474 www.elecro.co.uk NANO SPLASHER (ALL TITANIUM) Speciﬁcally designed to ensure maximum safety, reliability and efﬁciency, the Nano Splasher fully titanium “Plug & Play” heater is an ideal solution for soft/hard sided and splasher pools. FEATURES • Available as 2-kW & 3-kW “Plug & Pla y” • Analogue control with 1.2°C differential • Easy installation, fully equipped and pre-wired • Titanium ﬂow tube and titanium heating element • Robust, durable construction • Can be ﬂoor or vertically wall mounted • Ultra-reliable ﬂow switch allows safe operation • Vortex, long life, stay clean heating element technology • Supplied with temperature thermostat and overheating sensor • 100% e fﬁciency throughout the product lif e • Silent operation • Compact, durable desig

Open the catalog to page 1

SPECIFICATIONS POWER SUPPLY FLOW REQUIREMENTS HEATING ELEMENT FLOW TUBE CONTROL THERMOSTAT FLOW SWITCH Gold tipped reed switch with titanium fulcrum pin Surface mount DPDT Finder 66.82.8.230.0000 High temperature special formula EPDM ferrules, TPE end ﬁtting gask ets WATER CONNECTIONS 1.5” BSP female thread supplied with 1½” / 50mm st epped ABS unions for rigid pipe and 1½” / 1¼” st epped hose tails for ﬂexible pipe INTERNATIONAL PROTECTION MARKING WORKING PRESSURE Floor or wall mounting GROSS WEIGHT Euro Plug (Type F) Power Output PRODUCT CODES *Only sold in pack of 6pcs DSE121-EN-Nano Splasher...

Open the catalog to page 2

NANO SPLASHER

NANO SPLASHER

Catalog excerpts

All Elecro Engineering LTD catalogs and technical brochures