*myarchiexpo

FLOWLINE 2

Product catalog summary

Overview
The Elecro FlowLine 2 is a fully titanium heater designed for both in-ground and above-ground pools, as well as spas. It offers a range of power options from 2-kW to 24-kW and is known for its robust and durable construction.

Features

Nine power options ranging from 2-kW to 24-kW.
Non-wired, requires connection to an external contactor.
Equipped with a reliable flow switch for safe operation.
Includes a temperature thermostat and overheating sensor.
Compact and durable design with silent operation.

Technical Specifications

Power Supply: Available in single-phase or three-phase.
Flow Requirements: Minimum flow of 1m³/h for 3-kW & 6-kW models, and 4m³/h for 9-kW to 24-kW models. Maximum flow is 17m³/h.
Heating Elements: Made from Grade 1 titanium.
Flow Tube: Also made from Grade 1 titanium.
Safety: Features a thermal cut-out at 60°C with manual reset.
Flow Switch: Gold tipped reed switch with titanium fulcrum pin.
Seals: High-temperature EPDM ferrules and TPE end fitting gaskets.
Water Connections: 1.5” BSP female thread with ABS unions and hose tails for flexible pipe connections.
International Protection: Rated at IP44.
Frequency: Operates at 50/60 Hz.
Working Pressure: Maximum of 4 bar.
Mounting: Can be floor or wall-mounted.
Control Thermostat: Analogue control ranging from 0 to 45°C with a 1.2°C differential.

Performance

Pressure Drop: Analogue control with a 1.2°C differential ensures efficient operation.
Efficiency: Maintains 100% efficiency throughout its product life.

Models and Dimensions

Various models are available with different power outputs and dimensions, suitable for different voltage requirements.
Product codes vary based on power output and phase requirements.

Contact Information
For more information, contact Elecro at [email protected] or call +44 (0) 1438 749474. Visit their website at www.elecro.co.uk.

Catalog excerpts

Unit 11, Gunnels Wood Park, Stevenage, Hertfordshire SG1 2BH [email protected] | +44 (0) 1438 749474 www.elecro.co.uk Reliable, accurate and efﬁcient, the Elecro FlowLine 2 fully titanium heater is the ideal choice for in-ground pools, above-ground pools and spas. FEATURES • Nine power options ranging from 2-kW to 24-kW • Analogue control with 1.2°C differential • Non-wired, requires connection to external contactor • Titanium ﬂow tube and titanium heating element(s) • Robust, durable construction • Can be ﬂoor or vertically wall mounted • Ultra-reliable ﬂow switch allows safe operation • Vortex, long life, stay clean heating element technology • Fitted with temperature thermostat and overheating sensor • 100% e fﬁciency throughout the product lif e • Silent operation • Compact, durable design TECHNICAL DRAWINGS PRESSURE DROP PRESSURE (BAR)

Open the catalog to page 1

SPECIFICATIONS POWER SUPPLY Single phase or three phase FLOW REQUIREMENTS Minimum ﬂow: 3-kW & 6-kW, 1m³/h Minimum ﬂow: 9-kW to 24-kW, 4m³/h Maximum ﬂow: 17m³/h HEATING ELEMENTS FLOW TUBE CONTROL THERMOSTAT FLOW SWITCH Gold tipped reed switch with titanium fulcrum pin High temperature special formula EPDM ferrules, TPE end ﬁtting gask ets WATER CONNECTIONS 1.5” BSP female thread supplied with 1½” / 50mm st epped ABS unions for rigid pipe and 1½” / 1¼” st epped hose tails for ﬂexible pipe INTERNATIONAL PROTECTION MARKING WORKING PRESSURE Floor or wall mounting Power Output GROSS WEIGHT PRODUCT...

Open the catalog to page 2

FLOWLINE 2

FLOWLINE 2

Catalog excerpts

All Elecro Engineering LTD catalogs and technical brochures