CYGNET AQUATIC EVO 2 DATA SHEET

1 / 2 PagesView full catalog

CYGNET AQUATIC EVO 2 DATA SHEET

Product catalog summary

Features

Available in six power options from 1-kW to 8.4-kW.
Easy installation with fully equipped and pre-wired units.
Robust and durable construction with ultra-reliable flow switch for safe operation.
Includes temperature thermostat and overheating sensor.
Compact and durable design suitable for ponds and tropical marine applications.

Technical Specifications

Power Supply: Single phase or three phase.
Flow Requirements: Minimum 1m³/h, Maximum 17m³/h.
Heating Elements and Flow Tube: Made from Grade 1 titanium.
Control Thermostat: Analogue (0 > 45°C, 1.2°C differential) or Digital (0 > 45°C, 0.5°C differential).
Safety Thermal Cut Out: 60°C with manual reset.
Flow Switch: Gold tipped reed switch with titanium fulcrum pin.
Contactors: Siemens 3RT2023 or 3RT2027.
Seals: High temperature special formula EPDM ferrules, TPE end fitting gaskets.
Water Connections: 1.5” BSP female thread with stepped ABS unions and hose tails.
International Protection Marking: IP44.
Frequency: 50/60 Hz.
Working Pressure: Maximum 4 bar.
Mounting: Floor or wall mounting options available.

Models and Performance

Pressure Drop: Detailed for various models and flow rates.
Model Codes: Specific codes for different power outputs and configurations.
Net and Gross Weights: Provided for each model.
Volume: Consistent volume of 0.059 m³ across models.

Contact Information

Address: Unit 11, Gunnels Wood Park, Stevenage, Hertfordshire SG1 2BH.
Email: [email protected]
Phone: +44 (0) 1438 749474
Website: www.elecro.co.uk

Catalog excerpts

Unit 11, Gunnels Wood Park, Stevenage, Hertfordshire SG1 2BH [email protected] | +44 (0) 1438 749474 www.elecro.co.uk CYGNET AQUATIC HEATER (ALL TITANIUM) Supplied with low watts density coiled titanium heating elements. Cygnet heaters are titanium construction and an ideal solution for ponds and tropical marine applications. FEATURES • Six power options ranging from 1-kW to 8.4-kW • Easy installation, fully equipped and pre-wired • Robust, durable construction • Ultra-reliable ﬂow switch allows safe operation • Supplied with temperature thermostat & overheating sensor • Compact, durable design • Analogue control with 1.2˚C differential or digital control with 0.5˚C differential and selectable multi-lingual display • Titanium ﬂow tube and titanium heating element(s) • Can be ﬂoor or vertically wall mounted • Vortex, long life, stay clean heating element technology • 100% efﬁciency throughout the product life • S

Open the catalog to page 1

SPECIFICATIONS POWER SUPPLY Single phase or three phase FLOW REQUIREMENTS HEATING ELEMENTS FLOW TUBE CONTROL THERMOSTAT Analogue: 0 > 45°C (1.2°C differential) Digital: 0 > 45°C (0.5°C differential) FLOW SWITCH Gold tipped reed switch with titanium fulcrum pin High temperature special formula EPDM ferrules, TPE end ﬁtting gaskets WATER CONNECTIONS 1.5” BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for ﬂexible pipe INTERNATIONAL PROTECTION MARKING WORKING PRESSURE Floor or wall mounting GROSS WEIGHT Power Output PRODUCT CODES * for...

Open the catalog to page 2

CYGNET AQUATIC EVO 2 DATA SHEET

CYGNET AQUATIC EVO 2 DATA SHEET

Catalog excerpts

All Elecro Engineering LTD catalogs and technical brochures