EGGER OS´Brace™

Product catalog summary

Product Overview: The document is a product data sheet for EGGER OS´Brace™, an OSB/3 board designed for load-bearing purposes under humid conditions. It is certified as a 'Structural Sheet Bracing Panel' in Australia and complies with emission class E1.

Specifications: The board is available in thicknesses ranging from 6 mm to 25 mm, with a density requirement of at least 600 kg/m³. It meets various mechanical property standards, including internal bond strength, bending strength, and modulus of elasticity, as per EN standards.

Mechanical Properties: The board's mechanical properties are specified for different thickness ranges. For example, the internal bond strength is ≥0.34 N/mm² for 6-10 mm thickness, and bending strength in the major axis is ≥22 N/mm².

General Tolerances: The document outlines tolerances for length, width, thickness, squareness, and edge straightness, adhering to EN 324 standards.

Building Physical Properties: The thermal conductivity is specified at 0.13 W/(m⋅K), and water vapor permeability is given with μ-values of 200/150 (dry cup/wet cup).

Approval and Standards: The product is approved under Australian standards AS1684 and AS1720.1, with certification from the University of Technology, Sydney.

Formaldehyde Content: The formaldehyde content is limited to ≤8.0 mg/100g, following EN ISO 12460-5 standards, with additional guidelines from the DIBt-recommendation 100.

Catalog excerpts

PRODUCT DATA SHEET EGGER OS'Brace™ Recipe: 739, (unsanded) Material description: OSB/3 board (according EN 300) for load bearing purposes under humid conditions. The thickness of 6 mm is certified by UTS (University of Technology, Sydney) as “Structural Sheet Bracing Panel” under AS 1684 and AS 1720.1 in Australia emission class - E1, Tests according valid EN-standards. Strength values are average values. PLANT: RADAUTI *2) Perforator value according EN 120 according “DIBt-recommendation 100” from June 1994 are the allowed values: half year average value: 6,5mg HCHO/100g abs. dry board single value: 8,0mg HCHO/100g abs. dry board Quality management Release date:

Open the catalog to page 1

All EGGER catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list