EGGER OS´Brace™ – H2 Blue

Product catalog summary

Product Overview: The document is a product data sheet for EGGER OS´Brace™ – H2 Blue, an OSB/3 board designed for load-bearing purposes under humid conditions. It is certified for structural sheet bracing in Australia, specifically for a thickness of 6 mm.

Material Specifications: The board is classified under EN 300 standards and contains a chemical additive for termite protection. It meets emission class E1 standards, with strength values provided as average values.

Mechanical Properties: The board's mechanical properties include a density of ≥600 kg/m³, internal bond strength of ≥0.34 N/mm², and bending strength of ≥22 N/mm² along the major axis. The modulus of elasticity is ≥4500 N/mm² for the major axis.

General Tolerances: Tolerances include a length tolerance of ±3.0 mm, width tolerance of +0/-3.0 mm, and thickness tolerance of ±0.5 mm. Squareness and edge straightness tolerances are ≤2.0 mm/m and ≤1.5 mm/m, respectively.

Building Physical Properties: The thermal conductivity is 0.13 W/(m⋅K), and water vapor permeability is specified with μ-values of 200/150 (dry cup/wet cup).

Termite Treatment: The boards are treated with Permethrin according to AS NZS 1604-2 standards for termite protection.

Certifications and Approvals: The product is approved in Australia under AS1684 and AS1720.1 standards, with certification by the University of Technology, Sydney.

Additional Notes: The document includes specific requirements for formaldehyde content and moisture content at dispatch.

Catalog excerpts

PRODUCT DATA SHEET EGGER OS'Brace™ - H2 Blue Recipe: 731, (unsanded) Material description: OSB/3 board (according EN 300) for use for load bearing purposes under humid conditions. Only the thickness of 6 mm is certified by UTS (University of Technology, Sydney) as “Structural Sheet Bracing Panel" under AS 1684 and AS 1720.1 in Australia. The boards contain chemical additive for protection against termites, emission class - E1, Tests according valid EN-standards. Strength values are average values. PLANT: RADAUTI *1) When dispatched *2) Perforator value according EN 120: according “DIBt-recommendation 100" from June 1994 are the allowed values: half year average value: 6,5mg HCHO/100g abs. dry board single value: 8,0mg HCHO/100g abs. dry board Quality management Release date:

Open the catalog to page 1

All EGGER catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list