TECHNICAL DATA SHEET Effisus Titegutter3 The Effisus Titegutter3 is an integrated industrial gutter joint sealing system with 3 waterproofing levels. The system is composed by the Effisus 2Bond DS Tape, overlaid by the Effisus Ecofacade Membrane with 1.3mmthickness adhered to the gutter surface and closed with the Effisus Bonding KF+P Adhesive. ACCESSORIES . Effisus Ecofacade . Effisus 2Bond DS . Effisus Bonding KF+P

TECHNICAL DATA SHEET Effisus Ecofacade Elastomer sheet for waterproofing from Ethtlen-Propylen--Dien-Terpolymer (EPDM), homogeneous, cured, non-backed. Elastomer sheets as underlay for walls. Essential characteristics Method Result Thickness Water vapour permeability p Tensile strength Tensile elongation Resistance to nail tearing Fire reaction EN 13501-1 Class E Resistance to artificial ageing EN 1296 In accordance

TECHNICAL DATA SHEET Effisus 2Bond DS Effisus 2Bond DS is a double-side adhesive and sealant tape based on innovative and advanced technology active sealants. Developed to permanent water seal two or more substrates and seal any kind of nail, screw or steel anchor perforations on a substrate or a membrane. Suitable for use in a wide range of construction substrates including EPDM, TPO, most PVC1), CSPE/ Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene,...

TECHNICAL DATA SHEET Others Use on concrete Effisus 2Bond DS Tape has exceptional properties even when applied on porous surfaces such as concrete. This adhesion capability allows the sealing of weatherproofing wall and roof membranes onto a concrete substrate. Technical data Surface preparation The surface must be cleaned with Effisus Cleaner or similar. Remove any dust, debris, oil and grease and other contaminants. At temperatures below 5ºC treat the surface with Effisus RED+ Primer. Application Remove one side of the 2Bond DS tape release liner and adhere it to the surface. Apply pressure...

TECHNICAL DATA SHEET Effisus Bonding KF+P BONDING KF + P 1 Effisus Bonding KF+P Adhesive is a single component adhesive / sealant based on PDMS polymer, solvent-free, for bonding / sealing EPDM and butyl to concrete, masonry, wood, glass, aluminium, steel and bitumen or lap joint connections. Essential characteristics EFFISUS BONDING KF+P Base PDMS polymer Colour Black / White Viscosity Pasty Mechanical Properties Elastic Curing Moisture curing Recommended minimum layer thickness 1 mm

TECHNICAL DATA SHEET Others Processing guidelines Surface temperature between -5°C to +35°C. Do not seal on wet or frozen ground. Do not use with temperatures below -5ºC. Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates. Preparation The surfaces must be dry, clean and free of dust and grease. Use the Effisus Cleaner or similar. Pretreatment may be recommended. Apply the EPDM or butyl material to adhere/seal immediately, after 7 minutes at the latest and press. The exact waiting time depends on room temperature, film thickness...