TECHNICAL DATA SHEET Effisus Bond FT Effisus Bond FT Tape consists of an uncured EPDM membrane that has been laminated to a pressure-sensitive tape adhesive of 0,64 mm thickness, integrating a proven peel & stick technology. The Effisus Bond FT tape is extremely flexible, malleable and can be formed to fit irregular shapes and surfaces. Once cured, the tape is highly resistant to moisture, UV, temperature variations, and structural movements.

TECHNICAL DATA SHEET Effisus Bond FTTechnical data Essential characteristics Nominal Thickness Tensile Strength (uncured) Elongation (uncured) Ozone Resistance Peel Strength Shear Strength Brittleness Temperature Service Temperatur ASTM D 412 Die C ASTM D 412 ASTM D 1149 ASTM D 413 ASTM D 816 ASTM D 2137 ASTM D 3359 The foregoing information is published as general information only. Basic Use Effisus Bond FT tape is ideal for sealing flashing details on roofs and facades such as: • Overlay at T-joints, corners, pipes, and penetrations • General purpose flashing • Large round ducts • Metal edge...

TECHNICAL DATA SHEET Application Clean the entire surface where the Effisus Bond FT tape will be applied. Apply the Effisus Primer RED+ to the entire surface to be covered, following the instructions on the Effisus Bond FT application manual or the information on the Technical Data Sheet of the Effisus Primer RED+.* Once the primer is dry to the touch, install Effisus Bond FT Tape immediately. Position the tape over the primed area and remove the release liner gradually. Press down and form Effisus Bond FT Tape by hand. Roll the flashing with the Effisus silicone roller. Seal the edges of the...