TECHNICAL DATA SHEET Effisus Alltitegutter System An innovative gutter waterproofing liner for gutter repairs based on an self-adhesive EPDM membrane, scrim-reinforced, strong and dimensional stable. ACCESSORIES . Effisus Bond FT . Effisus Red+ . Effisus Primer 9800 . Effisus Bonding KF+P

TECHNICAL DATA SHEET Effisus Alltitegutter System The Effisus Alltitegutter Membrane is a two-ply EPDM membrane, scrim-reinforced with glassfiber. The product is laminated with a self-adhesive backing, covered by a protective foil. The range of use is as waterproofing membrane for gutter waterproofing. Essential characteristics Thickness Roll length Standard roll widths Tear resistance Cross direction 150N Length direction 150N Shear strength of joint Peel strength of joint Impact resistance Tensile strength, length direction Tensile strength, cross direction Resistance to static loading Artificial...

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Approvals, certificates & Specifications CE: EN 13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. EN 14909 - Flexible sheets for waterproofing. Plastic and rubber damp proof courses. EN 13984 - Flexible sheets for waterproofing. Plastic and rubber vapour control layer. Others Storage Store vertically, cool and dry in the original packaging. Store away from combustion sources and open flames. The shelf life is 12 months in unopened packaging.

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Effisus Bond FT Tape consists of an uncured EPDM membrane that has been laminated to a pressure-sensitive tape adhesive of 0,64 mm thickness, integrating a proven peel & stick technology. The Effisus Bond FT tape is extremely flexible, malleable and can be formed to fit irregular shapes and surfaces. Once cured, the tape is highly resistant to moisture, UV, temperature variations, and structural movements. Technical data Essential characteristics Nominal Thickness Tensile Strength (uncured) Elongation (uncured) Ozone Resistance Peel Strength Shear...

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Others Surface Preparation All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. If necessary, clean the surface with the Effisus Cleaner LV. Application Clean the entire surface where the Effisus Bond FT tape will be applied. Apply the Effisus Primer RED+ to the entire surface to be covered, following the instructions on the Effisus Bond FT application manual or the information on the Technical...

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Safety Avoid prolonged contact with skin. Before working with this or any product consult the Material Safety Data Sheet (MSDS) for necessary health and safety precautions.

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Effisus Primer RED+ Effisus Primer RED+ is a highly viscous ready-to-use product, it is used for priming substrate for a variety of weatherproofing membranes, its adhesion plus technology enables it to be used on both horizontal and vertical substrates like concrete, OSB, Plywood and Metal surfaces. Technical data Essential characteristics EFFISUS PRIMER RED+ Rubber Polymer based primer Solid Content Application Temperature Coverage Rate Shelf life 12 months if stored cool in unopened packing. * Use caution when installing at temperatures below...

TECHNICAL DATA SHEET EFFISUS ALLTITEGUTTER SYSTEM 1. EFFISUS Primer RED+ is a ready-to-use primer so do not dilute the primer, just shake /stir it well before use (every 20 minutes for maximum performance ). 2. The substrate must be dry and cleaned before applying, if any previous adhesive is found use EFFISUS cleaner LV. 3. When the surface is ready apply EFFISUS Primer RED+ with a scouring pad or a stiff brush, the surface should appear wet to look. 4. Apply the primer evenly and to a wider area than the actual application area to ensure full bonding. 5. Depending upon the ambient temp. allow...

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Effisus Primer 9800 is a polymer based primer for consequent use with self-adhesive Effisus Alltitegutter membrane, and for priming porous substrates. Technical data Essential characteristics Primer based on a synthetic rubber and synthetic resins, dissolved in inflammable organic solvents. Flash point Coverage rate Application temperature (weather conditions) > +5ºC (check Application Method notes below)

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Additional Information Storage Store material in original unopened containers in a well ventilated place and dry storage place at temperatures in between +5ºC and 30ºC. Keep away from direct sunlight. Shelf Life 18 months. Safety Product is extremely flammable packed in pressurized cannister. Keep away from open fire. Prior to working with this product consult product label and Safety Data Sheet (SDS) for necessary health and safety precautions. Application Method All the surfaces, should be clean, dry, and free from oil and grease prior to primer...

TECHNICAL DATA SHEET EFFISUS ALLTITEGUTTER SYSTEM Effisus Bonding KF+P Adhesive is a single component adhesive / sealant based on PDMS polymer, solvent-free, for bonding / sealing EPDM and butyl to concrete, masonry, wood, glass, aluminium, steel and bitumen or lap joint connections. Essential characteristics EFFISUS BONDING KF+P Base PDMS polymer Colour Black / White Viscosity Pasty Mechanical Properties Elastic Curing Moisture curing Recommended minimum layer thickness 1 mm

EFFISUS ALLTITEGUTTER SYSTEM TECHNICAL DATA SHEET Others Processing guidelines Surface temperature between -5°C to +35°C. Do not seal on wet or frozen ground. Do not use with temperatures below -5ºC. Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates. Preparation The surfaces must be dry, clean and free of dust and grease. Use the Effisus Cleaner or similar. Pretreatment may be recommended. Apply the EPDM or butyl material to adhere/seal immediately, after 7 minutes at the latest and press. The exact waiting time depends on room...