TECHNICAL DATA SHEET Effisus 2Bond GO Effisus 2Bond GO is an extruded butyl-rubber adhesive tape, water-resistant and with very high ageing resistance. It is used for sealing and bonding at roofs, windows, and facades as well as in timber, glass, and metal construction.

TECHNICAL DATA SHEET Technical data Essential characteristics Total thickness (without release liner) Release liner Silicone paper PIB/butyl rubber adhesive Water resistance Ageing resistance Very high Oil, many organic solvents e.g. mineral spirits Very high Temperature range Application temperature Band widths Core diameter Color of butyl rubber +5ºC to +25ºC (protected from UV radiation) b) At increasing temperature the adhesive mass becomes softer and stickier, at decreasing temperature harder Others Application For sealing and bonding wind and vapour barriers as well as sheathing membranes...

Application Notes Surfaces must be dry and free of release agents, grease, oil, tensides, dirt and dust. Not resistant against oil, many organic solvents, e.g. mineral spirits. We recommend preconditioning porous or sandy sub surfaces with Effisus Coat NP. Must not be used for bondings under mechanical load. It must be bonded as tension-free as possible and pressed and rubbed adequately onto surfaces. The adhesion may be improved by applying higher pressure. Due to eventual plasticizer migration, the product‘s suitability on plastics and rubber is to be tested. TECHNICAL DATA SHEET